Kawi2strokes.com Forum

I rebuilt my s2. It was stock and very loose 14,000 miles.
I put on s3 carbs and matched the air inlet/intake pipe manifolds to them.
Charlie did a great job on my crank!!!!! zero run out
Tom V. rebuilt my oil lines
I went from a 4 bearing to a 6 bearing crank. I drilled the extra oil holes.
So far I am running 20 pilots , 90 mains and stock needles it seems close but I will fine tune it when it warms up some more (still highs in the 30s-40s)
Here it is.


Here is a short video
https://www.youtube.com/watch?v=CkVX5CIGRqA

Sounds very healthy! Have you tetorqued the heads yet?

_________________
H2B..... H1E..... Z1B ..... RD350...... X6 Hustler..... TS250.... CB750 ..... CB550...... and a Bomber!!

Thanks !!
If you mean re-torque ? Yes I did after I shot the video, I re-torqued them.
Its going to be in the 60s next week so I hope to get take it out for a test ride.

Nice and a 72 S2 high on my wants list

_________________
1975 S3 project bike
1974 H1 project bike
1972 Yamaha R5
1974 Yamaha RD350

Crisp!! Bringing it to RB's?

Yes, and if I take a bike with to mid-Ohio it will be the one I take.

Awesome....Love to see that at Mid-Ohio.....puppy sounds really crisp !

THX Phl