oxford wrote:
What's the weight difference going to be, plus or minus over stock?
Have to wait till it's finished!
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Cool rear brake mod........ http://www.kawi2strokes.com/forum/viewtopic.php?f=16&t=2455 |
Page 2 of 2 |
| Author: | oxford [ Wed Feb 15, 2012 5:14 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
What's the weight difference going to be, plus or minus over stock? |
|
| Author: | Ja-Moo [ Wed Feb 15, 2012 5:22 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
oxford wrote: What's the weight difference going to be, plus or minus over stock? Have to wait till it's finished!
|
|
| Author: | RODH2 [ Wed Feb 15, 2012 6:09 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
^ Heavier..... 
|
|
| Author: | H2RTuner [ Wed Feb 15, 2012 10:17 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
I'd have done it differently for a spoke wheel set. I'd have used a front hub for disk brake, and made an adapter to solid mount the sprocket to the hub. I ran a Morris mag on the rear of my hopped up street H2 for 20 years, with solid mount sprocket, and had NO adverse issues with not having a cushion drive for the rear sprocket. The adapter in the picture is nicely made, though. |
|
| Author: | usernameandpassword [ Wed Feb 15, 2012 11:07 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
H2RTuner wrote: I'd have done it differently for a spoke wheel set. I'd have used a front hub for disk brake.... I'm wondering how the longer spokes with less steep angles would hold up under the torque. 
|
|
| Author: | Looney Cylinders [ Sat Feb 18, 2012 2:27 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
^^^ Perhaps the heavy/ big diameter H1/H2 front hub has a good use after all!!  J |
|
| Author: | H2RTuner [ Sat Feb 18, 2012 2:47 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
A rim with different spoke angles would change the spoke angle from a cross 2 to either a cross 3 or 4, super strong, and, the hub wouldn't have to be altered in the spoke holes. If a pumped up hot rod flat track Hogley-Doggelson can use a small hub and spokes in a cross 3 or 4 pattern, and not fling itself apart, our bikes should work just fine with it. |
|
| Author: | Ja-Moo [ Sat Feb 18, 2012 2:59 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
I had posted just about the same thing witrh flat trackers and their spool hubs, but it disappeared......  Happens to all of us.....
|
|
| Author: | ThreePipesSmokin [ Sat Feb 18, 2012 6:51 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
Ja-Moo wrote: I had posted just about the same thing witrh flat trackers and their spool hubs, but it disappeared...... Happens to all of us.....That's OK, I've seen some double posts recently so it evens out...
|
|
| Author: | H2RTuner [ Sat Feb 18, 2012 8:30 pm ] |
| Post subject: | Re: Cool rear brake mod........ |
Software voodoo! |
|
| Page 2 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|