Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Mar 28, 2024 9:28 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Wed Jan 17, 2018 6:02 pm 

Joined: Tue Jun 21, 2011 5:11 pm
Posts: 143
Im using old aftermarket wheels for my build. They came from a Z1. So, im fiddling with spacers and such. It looks to me so far that the right side wheel spacer is shorter on the H2 than the Z1. Also, the axle and inner cush drive spacer is shorter. I guess my question is wether or not the sprocket carriers are the same. I put it all together with the H2 Spacers and axle, the snugged the axle nut for a test fit and the wheel was turning tightly. The only Z1 parts left are the sprocket carrier and brake drum. But I always thought they were the same.

_________________
72 H2- 69 H1-73 Z1 -85 RZ350-1986 Ducati F1B -79 Ducati Darmah- 78 Ducati 900GTS-80 DUCATI SSD- 82 Ducati Pantah 600SL- -02 Harley FXD-87 GSXR1100-83 KDX200A1-79GS1000S WES COOLEY


Top
 Profile  
 
PostPosted: Sun Jan 12, 2020 11:42 pm 
User avatar

Joined: Thu Jun 09, 2011 7:45 pm
Posts: 212
Location: cowasockieville illinois
Sprocket carrier for H2 is not as thick as Z1, and uses a shorter spacer. Brake plate should be the same. Z1 rear hub is same as H2B/C.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group