Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Another oil line/banjo/pump thread http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=9074 |
Page 2 of 2 |
Author: | Stev-o [ Tue Aug 15, 2017 6:10 pm ] |
Post subject: | Re: Another oil line/banjo/pump thread |
Searching the site for oil line info and dragged this thread up. So my H2B basket case came with rubber hose that connects the pump to the carb float bowl, see pic. I'd like to replace them. Is this an acceptable, but where do I get the hose? Or, is the upgrade the only way to go? Rather not spend the $175 if not necessary. Thanks |
Author: | BarryB [ Tue Aug 15, 2017 6:23 pm ] |
Post subject: | Re: Another oil line/banjo/pump thread |
Glad for bringing this up. And thank you Phil for posting the info from KTOG. Paul Gast asked me to look for a set - there's nothing on the internet, I checked with Darth recently and he's not making any now. I think there's a market for new ones if someone is willing to make them. |
Author: | mraxl [ Wed Aug 16, 2017 3:52 am ] |
Post subject: | Re: Another oil line/banjo/pump thread |
For the oil lines you can use 1/4" tubing and Kaw p/n 16128-009 or Hodaka p/n 993713 check valves to attach at carbs. |
Author: | Stev-o [ Wed Aug 16, 2017 9:43 am ] |
Post subject: | Re: Another oil line/banjo/pump thread |
mraxl wrote: For the oil lines you can use 1/4" tubing and Kaw p/n 16128-009 or Hodaka p/n 993713 check valves to attach at carbs. Good info, thank you. I called Jess and he said his fuel line could be used, I had a small piece of 3/16" and its a good fit on the check valve. Another question: What is the procedure for checking the check valves? I cannot blow air through them. A search turned up the valve that can be disassembled, has ball and spring, I do not have that type. Mine have been vapor blasted and ultrasonically cleaned [along with the carbs]. Thanks in advance. |
Author: | DGA [ Wed Aug 16, 2017 10:56 am ] |
Post subject: | Re: Another oil line/banjo/pump thread |
See my post at viewtopic.php?f=14&t=12543 |
Author: | BBP [ Sat Aug 19, 2017 8:55 pm ] |
Post subject: | Re: Another oil line/banjo/pump thread |
SteveO You can use Tygon weed eater fuel line from the pump banjo to the carbs...........and it's clear (yellow), so you can see oil in it..........it's cheap, and replace it yearly, works in a pinch anyways, not for a show bike, that is what I did when I had the 4 line pump...........now I am 3 line pump converted on the B\C motor, and TMX flat slide 38 carbs I sold that Darth 3 into 1 line for brass banjo's............I wish I would have kept it now that I have a spare H2C motor...........they are supposed to start making them again at some point in time THX Phil |
Author: | Stev-o [ Sat Aug 19, 2017 9:40 pm ] |
Post subject: | Re: Another oil line/banjo/pump thread |
BBP wrote: SteveO You can use Tygon weed eater fuel line from the pump banjo to the carbs..... Thanks, I thought of that. I trimmed a minimal amount off my existing oil lines and I will be able to reuse them. I did order NOS check valves, waiting on that shipment. |
Page 2 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |