Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

M8 X 1.0 pitch socket head screw
http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=4084
Page 1 of 3

Author:  two-stroke-brit [ Thu Aug 09, 2012 1:57 pm ]
Post subject:  M8 X 1.0 pitch socket head screw

i have tried to buy a couple of these but the only place i can find them is mc master carr .
and only a box of 50 .
anybody know somewhere else to try?
thanks mark

Author:  Walms [ Thu Aug 09, 2012 2:17 pm ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

Tough call depending on your local... I have 4 places within a city block I can go to, they are all machine shop (industrial) supply shops.

Author:  ZERO [ Thu Aug 09, 2012 2:49 pm ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

How long and how many? I've got quite a stash. All new.

Author:  ThatGPzGuy [ Thu Aug 09, 2012 6:13 pm ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

If I just need one or two I run down to Ace Hardware. They have a great selection of SS metric bolts but it's pricey. If I can wait and I need a few I go to http://www.boltdepot.com/catalog.aspx?gclid=CIGi3YPV27ECFc-b7Qod5iAAMw

Author:  two-stroke-brit [ Thu Aug 09, 2012 7:00 pm ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

the problem is the std pitch for the M8 thread is 1.25 i need the fine variant of 1.0 pitch,
ace dosent carry them ,
and boltdepot dosent either.
nor graingers
home depot ,lowes etc

i only need two and anywhere from 10mm to 25mm long,
preferably threaded upto the head but i can work with anything as long as its the correct pitch.
.
ZERO if you have the right pitch i would love a couple from you. let me know.
cheers mark

Author:  Walms [ Thu Aug 09, 2012 7:25 pm ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

http://www.google.ca/search?hl=en&clien ... 416#mldd=2

Author:  ThatGPzGuy [ Thu Aug 09, 2012 7:31 pm ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

You are not kidding. Those are hard to find. What are they for?
Good luck.

Author:  two-stroke-brit [ Thu Aug 09, 2012 7:42 pm ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

thanks walms i will give fastenal a bell tommorow and if the stock them, i can drive round and pick em up.

i have swapped the rotor over to the right hand side and i have made a cover for the unused rotor mount holes,
just didnt like the look of something missing and dont need dual discs.

cheers mark

Author:  ZERO [ Fri Aug 10, 2012 7:26 am ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

two-stroke-brit wrote:
the problem is the std pitch for the M8 thread is 1.25 i need the fine variant of 1.0 pitch,
ace dosent carry them ,
and boltdepot dosent either.
nor graingers
home depot ,lowes etc

i only need two and anywhere from 10mm to 25mm long,
preferably threaded upto the head but i can work with anything as long as its the correct pitch.
.
ZERO if you have the right pitch i would love a couple from you. let me know.
cheers mark

I'll look now and get back to you in a moment..........

Author:  Steve [ Fri Aug 10, 2012 7:48 am ]
Post subject:  Re: M8 X 1.0 pitch socket head screw

If you have a Kawasaki part number, I'm sure I have them.

Fastenal is great, but sometimes you have to buy in bulk.

It took me a year to sell all the head nuts I had to order to get 10 for my 944, but they sure were paid for several times over!

Page 1 of 3 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/