Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
H1/H1B timing tip http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=3498 |
Page 1 of 1 |
Author: | Looney Cylinders [ Tue Jun 05, 2012 7:29 pm ] |
Post subject: | H1/H1B timing tip |
To get an extra degree or two (or to do a fine adjustment) if you loosen the three stator mount screws it is possible to rotate the complete stator assy in the cases a couple of degrees. This works out to .046in. per degree of "clocking" on the stator. This comes in handy if dealing with frail wiring/pickups on the H1/H1A (won't alter the pickup's air gap either) or when wanting to get near the 25 degree timing of points on an H1B. J |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |