Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
stuck baffle http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=2844 |
Page 1 of 1 |
Author: | two-stroke-brit [ Mon Mar 26, 2012 12:12 pm ] |
Post subject: | stuck baffle |
i was trying to remove and clean the baffles on the 73 H1D i am abusing in my garrage. and two came out with not much drama but the third is resisting all my attempts. it comes ot about 3 inches and seems to get hung up on something at will revolve but no more out. do i need a slide hammer doodad or am i missing something. cheers mark |
Author: | mraxl [ Mon Mar 26, 2012 12:23 pm ] |
Post subject: | Re: stuck baffle |
That's about how far it would come out before the packing material (if it has any) would catch the end of the muffler housing. Otherwise, push/pull, in/out, while twisting. |
Author: | two-stroke-brit [ Mon Mar 26, 2012 6:45 pm ] |
Post subject: | Re: stuck baffle |
thanks i will persivere. |
Author: | usernameandpassword [ Tue Mar 27, 2012 8:53 pm ] |
Post subject: | Re: stuck baffle |
If it's real thick stuff hard as a brick I've known gum cutter sprayed in the end while working will get them loose. Hose it down a bit all over the end then try working it. Some auto stores list it as 2+2. It's not on the shelf, you have to ask for it. Apparently bad things are made out of it. |
Author: | two-stroke-brit [ Tue Mar 27, 2012 9:47 pm ] |
Post subject: | Re: stuck baffle |
thanks i am saving my strength to fight it at the weekend. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |