Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Mon Apr 29, 2024 12:11 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Mar 07, 2012 1:21 pm 

Joined: Tue Jun 21, 2011 9:50 am
Posts: 43
Location: Austin, Texas
Is Belray Gear Saver Hypoid Gear Oil the same as Transmission Oil?
I went to a shop to buy some Belray Transmission Oil 80w and they were out. But they had some Gear Saver Hypoid Gear Oil 85w-90. They recommended as a substitute, but when I read more closely the words "Not recommended for wet clutches" on the bottle at home I got a little confused.
By the way, my bike is 74 Kawi H2.

I have not put fluid in yet because I am waiting for my S3 kickstand so my vent will stop siphoning fluid out. :cry:
I just want to know if I need to return this stuff.

Thanks,
Jack


Top
 Profile  
 
PostPosted: Wed Mar 07, 2012 1:23 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
I would say no to it. Regular car hypoid oil works great.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
PostPosted: Thu Mar 08, 2012 1:32 pm 
User avatar

Joined: Thu Jun 09, 2011 7:45 pm
Posts: 212
Location: cowasockieville illinois
return it & get the 80W trans oil


Top
 Profile  
 
PostPosted: Sun Mar 11, 2012 11:14 pm 
User avatar

Joined: Tue Sep 20, 2011 4:49 am
Posts: 149
Location: Melbourne Australia
I hust put the 10/30 in My KH500. Then i read on the tips it can do harm and to use the straight 80 w ger oil. Does anyone one know hat harm I ill be doing ?

_________________
Steve


Top
 Profile  
 
PostPosted: Mon Mar 12, 2012 12:54 am 

Joined: Thu Jun 09, 2011 8:26 am
Posts: 399
Location: Melbourne, Australia
You have used four stroke motorcycle engine oil presumably so its ok for a wet clutch.It may have a shorter effective life due to there being more shear than its intended use (higher volume of oil in most 4 strokes). As for the difference in numbers the following is pinched off wikipedia.
"API viscosity ratings for gear oils are not directly comparable with those for motor oil, and they are thinner than the figures suggest. For example, many modern gearboxes use a 75W90 gear oil, which is actually of equivalent viscosity to a 10W40 motor oil. Multigrade gear oils are becoming more common; while gear oil does not reach the temperatures of motor oil, it does warm up appreciably as the car is driven, due mostly to shear friction (with a small amount of heat conduction through the bellhousing from the engine block)."


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group