Can anyone confirm the headlamp bracket config on H2B/C?
I took no pics
and can;t remember how it goes.
Consists of each side according to Parts Manual:
a headlamp bracket, which has fork cover guide, washer and gasket below it. Above it a fork washer and 2 gaskets.
Parts manual a bit confusing but from my perspective looks like it should be ;
1/ Lower gasket on top of lower triple tree.
2/ Lower washer on top of gasket.
3/ Fork Cover on top of washer
4/ Then Headlamp bracket on top of lower washer
5/ Then upper washer on top of headlamp bracket
6/ Upper gasket on top of washer to fit under top triple tree. (Is the parts manual wrong should there be only one gasket on top and not two?)
TIA