| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Replacing spark plug wires http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=2411 |
Page 1 of 1 |
| Author: | straykat711 [ Sat Feb 11, 2012 9:11 am ] |
| Post subject: | Replacing spark plug wires |
I'm going to replace the spark plug wires on a 75 H1F, I have new spark plugs caps NGK LZFH non resistor type. What type of wire should I get, solid copper core or Copper Core Strand? It seems to me the strand would much easier to screw into the cap, but would it work just as well? 2nd question, Where the wire is put into the coils should the wire be stripped any on the end or just cut off blunt? |
|
| Author: | mraxl [ Sat Feb 11, 2012 9:26 am ] |
| Post subject: | Re: Replacing spark plug wires |
Use copper stranded. I believe there is a screw terminal in the coil wire cavity that is used to screw the wire onto. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|