Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu May 09, 2024 8:52 am

Board index » Our legendary Kawasaki Triples » Troubleshooting, How-to, and General Wrenching

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
COOPS
 Post subject: Clutch hub
PostPosted: Sun Jun 12, 2011 12:09 am 

Joined: Sat Jun 11, 2011 11:11 pm
Posts: 464
Location: New Zealand
Whats the story with the plain clutch hub washer that sits behind the lock washer?
What stops the plain washer from turning on the hub?
Steve.
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Clutch hub
PostPosted: Sun Jun 12, 2011 12:21 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
COOPS wrote:
Whats the story with the plain clutch hub washer that sits behind the lock washer?
What stops the plain washer from turning on the hub?
Steve.


It is dimpled into divots in the center hub

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
COOPS
 Post subject: Re: Clutch hub
PostPosted: Sun Jun 12, 2011 12:30 am 

Joined: Sat Jun 11, 2011 11:11 pm
Posts: 464
Location: New Zealand
Ja-Moo wrote:
COOPS wrote:
Whats the story with the plain clutch hub washer that sits behind the lock washer?
What stops the plain washer from turning on the hub?
Steve.


It is dimpled into divots in the center hub

Do you mean i have to bash it with a punch or something too push it into those drilled holes?
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Clutch hub
PostPosted: Sun Jun 12, 2011 12:33 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
COOPS wrote:
Ja-Moo wrote:
COOPS wrote:
Whats the story with the plain clutch hub washer that sits behind the lock washer?
What stops the plain washer from turning on the hub?
Steve.


It is dimpled into divots in the center hub

Do you mean i have to bash it with a punch or something too push it into those drilled holes?


It should alread have "bash" dimples. If you have a new one, then yes, no need for bashing, just tap the punch.....lol

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
COOPS
 Post subject: Re: Clutch hub
PostPosted: Sun Jun 12, 2011 12:43 am 

Joined: Sat Jun 11, 2011 11:11 pm
Posts: 464
Location: New Zealand
So your saying it should have dimples already bashed :lol: into it from new?
Cos i got a repop one from redline larry and its just a plain flat washer :?:

Edit.... Oh right now im there.... i do have too bash it :lol: cos its a new one.
Thanks Moo :D
Top
 Profile  
 
stevie747
 Post subject: Re: Clutch hub
PostPosted: Sun Jun 12, 2011 10:54 am 
User avatar

Joined: Sun Jun 12, 2011 4:37 am
Posts: 11
Location: England
This is what the parts look like, they're a set I bought ;)

Image

_________________
One wheel is enough...
Top
 Profile  
 
stevie747
 Post subject: Re: Clutch hub
PostPosted: Sun Jun 12, 2011 10:57 am 
User avatar

Joined: Sun Jun 12, 2011 4:37 am
Posts: 11
Location: England
COOPS wrote:
So your saying it should have dimples already bashed :lol: into it from new?
Cos i got a repop one from redline larry and its just a plain flat washer :?:

Edit.... Oh right now im there.... i do have too bash it :lol: cos its a new one.
Thanks Moo :D


You sure Larry didn't send you the thrust washer that fits between the baskets, which is plain :?:

_________________
One wheel is enough...
Top
 Profile  
 
COOPS
 Post subject: Re: Clutch hub
PostPosted: Mon Jun 13, 2011 10:49 pm 

Joined: Sat Jun 11, 2011 11:11 pm
Posts: 464
Location: New Zealand
stevie747 wrote:
COOPS wrote:
So your saying it should have dimples already bashed :lol: into it from new?
Cos i got a repop one from redline larry and its just a plain flat washer :?:

Edit.... Oh right now im there.... i do have too bash it :lol: cos its a new one.
Thanks Moo :D


You sure Larry didn't send you the thrust washer that fits between the baskets, which is plain :?:

Thanks for the reply stevie. I think im OK. Unless someone says otherwise.
I bought the plain washer from Larry, the nut came from my local kawa dealer and i got the lock washer from engineering supplier.
Did your washer come like that, in your pic, with dints already?
Thought id post pic cos im getting better at it. :)
Image
Top
 Profile  
 
Ja-Moo
 Post subject: Re: Clutch hub
PostPosted: Mon Jun 13, 2011 10:58 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
You have to stake a new washer.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........
Top
 Profile  
 
COOPS
 Post subject: Re: Clutch hub
PostPosted: Mon Jun 13, 2011 11:11 pm 

Joined: Sat Jun 11, 2011 11:11 pm
Posts: 464
Location: New Zealand
Ja-Moo wrote:
You have to stake a new washer.

Id rather bash it :lol:
Cheers everyone
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Our legendary Kawasaki Triples » Troubleshooting, How-to, and General Wrenching

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group