| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| removing pilot jet http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=1613 |
Page 1 of 1 |
| Author: | jason8887 [ Tue Nov 15, 2011 9:57 pm ] |
| Post subject: | removing pilot jet |
So, one of my pilot jets has the screw driver slot busted out of it. Anyone have any tricks for getting it out? it is flowing fuel, but I want to replace them with new stock ones (I have a feeling they may have been drilled in a previous life...) Jason |
|
| Author: | two-stroke-brit [ Tue Nov 15, 2011 10:12 pm ] |
| Post subject: | Re: removing pilot jet |
i got a set of LEFT hand drill bits with easy outs to match. and the drill pulled one of mine outwith ease. cheap enough mark |
|
| Author: | 72zx7r [ Wed Nov 16, 2011 6:48 am ] |
| Post subject: | Re: removing pilot jet |
+ one works well go slow |
|
| Author: | Jim C [ Wed Nov 16, 2011 8:44 am ] |
| Post subject: | Re: removing pilot jet |
I drilled through the center of one once and then backed out the remaining with a drill spinning in revers |
|
| Author: | jason8887 [ Wed Nov 16, 2011 10:10 pm ] |
| Post subject: | Re: removing pilot jet |
Good tips. Thanks guys |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|