Kawi2strokes.com Forum

Just hit a MAJOR JUG ISSUE!!!!!! Not sure what's up there's a problem fitting the chamber flanges. They fit the left jug but not the center or right jug. Any help is apricated. I can only assume that the center and right jugs are either a different year like the carbs are from a KH500 or totally different bore, perhaps a 400. It's a 1974 III H1 500 or suppose to be.

The red printing at the top of this page on the resource site explains the change in H1 stud diameter and spacing. Using early type stepped studs should get the flanges to fit the stud spacing.

https://kawatriple.com/partid/cylinders/cyldif.htm

_________________
If it surges, that's normal, upshift.

Thank you Jim. I'm starting to have concerns about this project bike. I'm third in line. Thought I was making progress.