Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sat Apr 27, 2024 6:09 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Magnito rebuilders
PostPosted: Fri Mar 08, 2024 10:30 pm 

Joined: Thu Jun 09, 2011 6:39 pm
Posts: 736
Location: Narooma NSW Aus
Hi Guys Im looking for the Guy that rebuilds Altinators Magnitos ,so I can send my spare to get done , carnt find ?? , i think hes in the US im in Aus , happy to send there ,look forward to replies , urs Al In Aus


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sat Mar 09, 2024 8:01 am 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9840
Location: North Central NC
What motorcycle is it? Is it a low speed magneto coil you need to get rebuilt, or a whole stator?

_________________
If it surges, that's normal, upshift.


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sat Mar 09, 2024 4:25 pm 

Joined: Thu Jun 09, 2011 6:39 pm
Posts: 736
Location: Narooma NSW Aus
Hi Jim Sorry I forgot to put that in H2 750 72 , no problem yet just figured I should have a good spare ready for the day it ever fails , as Im a bit sus on my low speed coil as shes getting harder to start ( could just be the crap fuel now
a days )


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sat Mar 09, 2024 5:43 pm 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9840
Location: North Central NC
So it's just the LS coil you want?

_________________
If it surges, that's normal, upshift.


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sat Mar 09, 2024 8:55 pm 

Joined: Thu Jun 09, 2011 6:39 pm
Posts: 736
Location: Narooma NSW Aus
Jim wrote:
So it's just the LS coil you want?

I am happy to take your advice on what to get , I thought the low speed coils were for each cyl , and combinded with high speed coil ??


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sat Mar 09, 2024 9:47 pm 
User avatar

Joined: Wed Jun 08, 2011 11:34 pm
Posts: 9840
Location: North Central NC
No, in an H2 stator there is one low speed magneto coil, one high speed magneto coil, and four battery charging coils. The LS magneto coil is the one most vulnerable to the effects of age, because it has a zillion turns of hair-fine wire.

_________________
If it surges, that's normal, upshift.


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sat Mar 09, 2024 10:29 pm 

Joined: Thu Jun 09, 2011 6:39 pm
Posts: 736
Location: Narooma NSW Aus
Jim wrote:
No, in an H2 stator there is one low speed magneto coil, one high speed magneto coil, and four battery charging coils. The LS magneto coil is the one most vulnerable to the effects of age, because it has a zillion turns of hair-fine wire.

thanks heaps as if you go by the manual they are all joined , I was suspect that there was only one low and high , so as I have bought from you before would you have a low speed coil to sell and a high as well ??


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sun Mar 10, 2024 5:18 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2694
Location: Dandridge, TN, USA
Before you start looking for coils see if there is spark at plug with plug laying on head.
if so, clean your pilot jets.

_________________
Answers are here: http://kawatriple.com/


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sun Mar 10, 2024 9:55 pm 

Joined: Thu Jun 09, 2011 6:39 pm
Posts: 736
Location: Narooma NSW Aus
mraxl wrote:
Before you start looking for coils see if there is spark at plug with plug laying on head.
if so, clean your pilot jets.

yes I went though carbies first thinking same as you all clean and floats set , does anyone have the resistance readings for the low speed coil and high speed coil so I can compare what reading Ive got , as manual dosent give it


Top
 Profile  
 
 Post subject: Re: Magnito rebuilders
PostPosted: Sun Mar 10, 2024 9:58 pm 

Joined: Thu Jun 09, 2011 6:39 pm
Posts: 736
Location: Narooma NSW Aus
can anyone give me reistance readings for low and high speed coils on a h2 manual dosnt have it ???


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group