Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
HORN Help! http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=14982 |
Page 1 of 1 |
Author: | Goodwrench [ Tue Feb 20, 2024 3:10 pm ] |
Post subject: | HORN Help! |
Guys, The Horn from my S2A project bike "used" work fine. Then I took it apart to paint the external surfaces. The inside is perfectly clean with no corrosion. I took pictures of the step by step disassembly and I reassembled per the pictures. Only problem is that now, it won't work. I have 12V to the horn and with it disassembled and hooked up to the bike, I get 12V internally when I push the horn button. The points seem to be OK and I can break continuity when I manually push them open. I'm sure the problem is in the reassembly process. Any thoughts or suggestions? |
Author: | mraxl [ Tue Feb 20, 2024 4:39 pm ] |
Post subject: | Re: HORN Help! |
There is a screw with a lock nut protruding. Try adjusting it in very small increments. |
Author: | Goodwrench [ Wed Feb 21, 2024 9:50 am ] |
Post subject: | Re: HORN Help! |
"Beep Beep" Thank you sir! |
Author: | ALTERED IMAGE [ Wed Feb 21, 2024 11:10 am ] |
Post subject: | Re: HORN Help! |
Screw that Dale mentions is for resonance positioning. Diaphragm has a natural frequency that bounces contacts open/closed. Little screw gets it within the small resonance window. cliff |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |