Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Stuck caliper piston http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=14917 |
Page 3 of 3 |
Author: | rotortiller [ Sun Oct 01, 2023 9:36 am ] |
Post subject: | Re: Stuck caliper piston |
These might be good at eliminating corrosion. I have used stainless on vintage bikes but these might be a better choice since dissimilar or galvanic corrosion does not exist. Not sure of the model applications though. https://godfferysgarage.com/product/phenolic-brake-caliper-piston-kh-kf/ |
Author: | Hambone1962 [ Wed Oct 18, 2023 1:00 pm ] |
Post subject: | Re: Stuck caliper piston |
Getting some parts ordered, will the caliper kit that Jim suggested from the U.K. work on the H1B? states H2?? https://www.ebay.com/itm/181917583592 |
Author: | Hambone1962 [ Wed Oct 18, 2023 7:44 pm ] |
Post subject: | Re: Stuck caliper piston |
I see the kits from the U.K. shows 2 different part part number's for the 72-75 H1 and the 72-73 H2, just want to get the right one. Thanks, Buddy. |
Author: | Hambone1962 [ Thu Oct 19, 2023 10:04 am ] |
Post subject: | Re: Stuck caliper piston |
Bump. |
Author: | mraxl [ Thu Oct 19, 2023 11:04 am ] |
Post subject: | Re: Stuck caliper piston |
The same caliper was used on all H series. Since you have an H1B the choice should be simple. |
Author: | Hambone1962 [ Thu Oct 19, 2023 9:24 pm ] |
Post subject: | Re: Stuck caliper piston |
mraxl wrote: The same caliper was used on all H series. Since you have an H1B the choice should be simple. Thanks, that's good to know. |
Page 3 of 3 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |