Kawi2strokes.com Forum

I am looking to remove the stator flywheel and I am looking for the correct puller
to do this. Can I thread in the rotor bolt and use it to pull the flywheel off with a standard type
puller or do I need to get a special puller? Thanks for the help!

If it's an H1 or an H2, I use a bolt that fits the threads in the rotor, like a rear shock bolt, and a piece of 1/4" steel rod the right length, which as I remember is about 1-1/4" long. If the rotor is pretty well stuck, you'll do better getting one of JRD's pullers (member here).

_________________
If it surges, that's normal, upshift.

Yes it is pretty stuck, thanks for the info.