Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
H2B engine mount boss http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=14739 |
Page 2 of 2 |
Author: | Never2Old [ Sat Oct 01, 2022 9:58 pm ] |
Post subject: | Re: H2B engine mount boss |
With a Nylock nut you should have the threads come all the way through the nylon to get the best locking. Remove a washer or two for better grip, not to mention what looks like a couple of nuts under there too. The double nuts on the exhaust stud are a little suspect too. Dave |
Author: | concours [ Wed Oct 05, 2022 10:55 am ] |
Post subject: | Re: H2B engine mount boss |
Author: | concours [ Thu Oct 06, 2022 6:03 am ] |
Post subject: | Re: H2B engine mount boss |
Never2Old wrote: With a Nylock nut you should have the threads come all the way through the nylon to get the best locking. Remove a washer or two for better grip, not to mention what looks like a couple of nuts under there too. The double nuts on the exhaust stud are a little suspect too. Dave Agreed. I just am doing a few shakedown miles before winter sets in. Unraveling the work of an (admittedly) NON-mechanic owner. |
Page 2 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |