| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Removing exhaust baffles http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=14593 |
Page 1 of 1 |
| Author: | Doug VK [ Thu Nov 25, 2021 12:43 pm ] |
| Post subject: | Removing exhaust baffles |
Hi Guys, I would like to remove the exhaust baffles on my 74 H1 but of course they are stuck. Does anybody know any tricks to ge then out? Thanks, Doug |
|
| Author: | Goodwrench [ Fri Nov 26, 2021 10:36 am ] |
| Post subject: | Re: Removing exhaust baffles |
I recently found an early H1 Muffler that doesn't appear to have ever been run. There is no evidence of internal oil deposits. The baffle is rusted solid. I'm thinking of submerging the muffler in Kroil or some other type of penetrant for a month or two and then use the slide hammer technique that's posted on the resource site. If you haven't already done so, go to the resource site. |
|
| Author: | Doug VK [ Sat Nov 27, 2021 10:17 am ] |
| Post subject: | Re: Removing exhaust baffles |
Hi goodwrench, yes I saw the pictures on using a slide hammer. I'm happy to say I got two of the three baffles out but one is stuck worse and hasen't come out. two thirds of the baffle holes were pluged with carbon. This I an sure would deter from the performance of the bike. I'll continue to play with the third problem child. Thanks, Doug |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|