Kawi2strokes.com Forum

Does anyone have a good machine shop you'd recommend who's got experience with triple cylinders/head work in NC or upstate SC? Prefer in Charlotte area or within a couple hour drive.

_________________
'72 H2 - '72 H2 - '72 H2 - '00 ZRX1100

It's not as close as you want, but T-Hoff in Raleigh did a good job for me at a reasonable price.

_________________
If it surges, that's normal, upshift.

Thanks Jim!

_________________
'72 H2 - '72 H2 - '72 H2 - '00 ZRX1100

You might ask Mark Haase. He lives near Charlotte I believe. He's here as "m in sc" and on 2-stroke world with the same board name, as I remember.

_________________
If it surges, that's normal, upshift.

Cycle Engineering in Waterloo SC (near Laurens) does all of my work. He's done H1, GT750, TS400, DT400 for me. Call James at 864-677-4630. James Shinault is a great guy and will treat you right. Tell him Lane sent you. James does cylinder boring, but I don't think he does head work.