I got bike running well again (over time) with a new CDI box and a low speed coil from Jim! My soldering ability is rough, and electrical knowledge MINimal. First starts after new coil proved I did not tuck lil wires in 'nuf. Redone, and bike starts and revs well. Before I go a few miles from home, just hoping to maximize my 'reliability'>>. Just thought 1 night to start bike in darkness, cover off, to see if I find any sparks or oddities. I can only see thru the gap between 'rotor' and main case. At idle and up to 3000rpm I saw nothing. About 3000+ I see a dull white light. Is there something in a 'normal' stator area that would show this? (no sparks nor sounds, just a faint 'light'). Thanks, Mark
|