| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| 74 H1 Jetting Recommendations http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=14054 |
Page 1 of 1 |
| Author: | J-Rod10 [ Wed Apr 01, 2020 6:09 am ] |
| Post subject: | 74 H1 Jetting Recommendations |
Picked up my first Kawi Triple yesterday, a 74 H1. Runs, but won't idle. Going to pull the carbs, clean them before I do anything else. Bike has a set of Uni pods, didn't have the airbox, and a set of J&R chambers. Anyone recommend a good starting point for jetting for that setup? |
|
| Author: | mraxl [ Wed Apr 01, 2020 6:51 am ] |
| Post subject: | Re: 74 H1 Jetting Recommendations |
pilot= #30 main= #102.5 needle clip= #2 This is starting point. More here: https://docs.google.com/spreadsheets/d/ ... edit#gid=0 |
|
| Author: | J-Rod10 [ Wed Apr 01, 2020 8:58 am ] |
| Post subject: | Re: 74 H1 Jetting Recommendations |
Much appreciated, mraxl! |
|
| Author: | Ja-Moo [ Thu Apr 02, 2020 10:47 am ] |
| Post subject: | Re: 74 H1 Jetting Recommendations |
Welcome to tripledom. And do NOT put in carb kits, none are any good. |
|
| Author: | J-Rod10 [ Fri Apr 03, 2020 9:02 am ] |
| Post subject: | Re: 74 H1 Jetting Recommendations |
Ja-Moo wrote: Welcome to tripledom. And do NOT put in carb kits, none are any good. I'll just be buying some brass and going at it that way. I don't think I've ever bought a jet kit for any of my bikes. Any recommendations for a good place to buy gaskets and such for these carbs? |
|
| Author: | Jim [ Fri Apr 03, 2020 9:12 am ] |
| Post subject: | Re: 74 H1 Jetting Recommendations |
J-Rod10 wrote: Any recommendations for a good place to buy gaskets and such for these carbs? Some guys buy carb kits, use the float valves and gaskets, and throw the rest away. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|