Kawi2strokes.com Forum

Ok, sorry another question but something again does not seem right. H2, café clip on bars, motion pro new cable, new vm34 carbs. This is what I am working with. I have routed the cable under the headlamp in front of the triple clamps then back along the left side of the upper tube. I thought everything was pretty obvious but it doesn't seem to be so. Three different lengths on the splitter so where does the short one and the medium one go? Does the left one go outside the frame rail? I am thinking the short one goes into the center carb and the medium goes on the left and the long goes far right. I have rerouted everything about 4 times now and it is getting old taking it all back apart. I don't have any binding but something just doesn't seem right. Both my manuals have no original cable mounting guide and I got tired of trying to hunt it down on the resource center. The café bars also don't help.

short always middle carb, main throttle cable on left of frame center, long cable on the right carb and vise versa.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........

Thanks.