Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
69 H1 Jetting Recommendations http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=13330 |
Page 1 of 1 |
Author: | mizike77 [ Mon Mar 12, 2018 5:10 am ] |
Post subject: | 69 H1 Jetting Recommendations |
My 69 has stock carbs with stock jetting. The bike has a fresh top end on first bore, unknown chambers ( possibly wirges) , stock air box with a K&N, and mild porting with bridges removed. There is too much snow here to ride it yet, but it fires and idles fair with a bit of throttle hang up as the revs come down . The carbs are dripping a bit so they need to come back off. I am looking to fiddle with some jetting while they are off . I glanced around a bit and didnt see anything for an early bike with mild mods.... Thanks |
Author: | mraxl [ Mon Mar 12, 2018 6:07 am ] |
Post subject: | Re: 69 H1 Jetting Recommendations |
If they are Wirges street then stock jetting is probably right. If they are not Wirges then go up one or two sizes on main jet. |
Author: | mizike77 [ Mon Mar 12, 2018 8:22 pm ] |
Post subject: | Re: 69 H1 Jetting Recommendations |
mraxl wrote: If they are Wirges street then stock jetting is probably right. If they are not Wirges then go up one or two sizes on main jet. I will give it a go and let you know how it goes Thanks for the help |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |