Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Do H1 carb springs have less tension than H2 springs? http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=12716 |
Page 1 of 1 |
Author: | kawi3cyl [ Sat Apr 22, 2017 9:15 pm ] |
Post subject: | Do H1 carb springs have less tension than H2 springs? |
I'll probably install a Crampbuster, but lighter springs would help too, so less tension or the same? TIA. |
Author: | Ja-Moo [ Sat Apr 22, 2017 10:21 pm ] |
Post subject: | Re: Do H1 carb springs have less tension than H2 springs? |
I don't remember them being different. |
Author: | tankie [ Sun Apr 23, 2017 2:19 am ] |
Post subject: | Re: Do H1 carb springs have less tension than H2 springs? |
There are at least two different springs for the H2 , early 16006-012 modified 16006-021 |
Author: | kawi3cyl [ Sun Apr 23, 2017 9:21 am ] |
Post subject: | Re: Do H1 carb springs have less tension than H2 springs? |
tankie wrote: There are at least two different springs for the H2 , early 16006-012 modified 16006-021 Hmm, going by the early PN shows this was also the 69-76 H1/KH500 spring as well. I'll dig out my H1 springs and try to do a comparison. Thanks. |
Author: | ALTERED IMAGE [ Tue Apr 25, 2017 2:55 am ] |
Post subject: | Re: Do H1 carb springs have less tension than H2 springs? |
I am running (3) H1 28mm return springs on the 34mm carbs. I did this due to the effort on the 34's. Modifying the throttle tube for quick response I really needed them. 27% lighter springs and 10% quicker throttle gives net 17% lighter twist. cliff |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |