Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Float gage http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=12677 |
Page 1 of 1 |
Author: | kawdennis [ Tue Apr 11, 2017 6:32 pm ] |
Post subject: | Float gage |
Hi all-I've been away from the form for about 8 years, anyway I let my Hi set to long without starting, I gave 1 of my H1s to my son with a fortune with extra parts, anyway I think Ja-Moo showed how to make a float gage I got my carbs apart and all cleaned up and I got 3 Sudco rebuild kits, Does anybody know how to make that float gage, as I remember I made one out of gaslit material thanks Dennis |
Author: | mraxl [ Tue Apr 11, 2017 8:56 pm ] |
Post subject: | Re: Float gage |
I think this is what you're looking for: http://kawatriple.com/tips/floatgage.htm Be aware that if you use those Sudco kits you will probably never get the bike to run right. The jets & needles will cause problems. |
Author: | Ja-Moo [ Tue Apr 11, 2017 9:24 pm ] |
Post subject: | Re: Float gage |
Yes, reuse your needles and jet, or get new genuine Mikuni jets. |
Author: | kawdennis [ Tue Apr 18, 2017 6:50 pm ] |
Post subject: | Re: Float gage |
Ja-Moo wrote: Yes, reuse your needles and jet, or get new genuine Mikuni jets. Thanks Guys- John that H1 motor you helped me rebuild (over the phone) years ago is still running great, I gave it to my son. Dennis |
Author: | Ja-Moo [ Tue Apr 18, 2017 7:01 pm ] |
Post subject: | Re: Float gage |
Great to hear Dennis! |
Author: | Hollister56 [ Tue Apr 18, 2017 10:35 pm ] |
Post subject: | Re: Float gage |
Is there a float gauge like that for the H2's? |
Author: | mraxl [ Wed Apr 19, 2017 4:56 am ] |
Post subject: | Re: Float gage |
Pretty sure H1 & H2 are the same. |
Author: | Hollister56 [ Wed Apr 19, 2017 11:20 pm ] |
Post subject: | Re: Float gage |
Thanks I will check that out. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |