Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
S2 clutch plates http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=12674 |
Page 1 of 2 |
Author: | GUTS [ Mon Apr 10, 2017 5:22 pm ] |
Post subject: | S2 clutch plates |
The friction plates are worn out on my S2. What are the favorite brands for replacement? There is a few NOS sets on ebay between $50 and $60. |
Author: | 4 Dog knight [ Mon Apr 10, 2017 5:38 pm ] |
Post subject: | Re: S2 clutch plates |
I b'lieve that they are the same as the KX125 in some of the searching I've done. With those little 125 mx'rs reaching close to 40 hp and LOTS of slam-banging gear changes in MX, they should be pretty durable. I'd check the part numbers on the two. Side note...a million yrs. ago when I was MX'ing, I was wearing out the tops of my Big John MX boots. Because I knew the tracks by heart, I started counting up the shifts I made in a Sunday of racing two classes (the SMART GUYS only raced one class!) and 3-15 minute motos per class, including practice ended up to being about 1,000 shifts a Sunday! That's when I better understood WHY my boot tops were wearing thru. Unless you're going road racing on your S-2, I'd guess 125 plates would be good to go? Let us know what you choose. 4 Dog |
Author: | GUTS [ Mon Apr 10, 2017 6:14 pm ] |
Post subject: | Re: S2 clutch plates |
Yup, the S series friction plates are the same part number so If I buy KX125 plates I'll be buying S series plates anyway. I was mostly wondering if some preferred a certain aftermarket brand or not. I'm sure either will work fine. |
Author: | III [ Tue Apr 11, 2017 12:58 am ] |
Post subject: | Re: S2 clutch plates |
Hey Bud, I have but the one NOS plate, but you can have it if you want it for postage. If nothing else, check the list of bikes using these plates. http://www.ebay.com/itm/13088-025-NOS-K ... 1889056260 I have a stack of cork plates here that came with a bunch of Kaw parts I bought years ago. I thought maybe Avenger? The bag just said 350. Might better check it now against the one Kaw plate I guess. to be continued...... |
Author: | III [ Tue Apr 11, 2017 1:40 am ] |
Post subject: | Re: S2 clutch plates |
OK, it seems I have about 4 complete sets of larger what look like H1 or H2 Barnett corks. Then there is a smaller set that match the outer diameter and tooth spacing on the new S2 KH Kaw cork I have. B U T the inner diameter is about 1/8" smaller, so there is a 1/16th lip shown when laid side by each. The A series plates I saw when researching, had a sort of lip or tang on the ends, these look like any stock triple plates I have seen If I had an H1 or H2 plate to compare these with, I may have a nice stash. Still in original Barnett bags, albeit a bit worn. pics later maybe |
Author: | GUTS [ Tue Apr 11, 2017 8:08 am ] |
Post subject: | Re: S2 clutch plates |
Thanks for the advice fellas, I think I will buy some stock plates from Mother Kaw. |
Author: | III [ Tue Apr 11, 2017 1:02 pm ] |
Post subject: | Re: S2 clutch plates |
OBSOLETE I am afraid http://www.partzilla.com/parts/detail/kawasaki/KP-13088-025.html |
Author: | III [ Tue Apr 11, 2017 1:12 pm ] |
Post subject: | Re: S2 clutch plates |
eBay search shows there is an alternate part number as well. Part part number = 13088-1015 Part Description = FRICTION PLATE Model Count = 53 KD125 75 125 KD125 MOTOCROSS KD125-A2 76 125 KD125 MOTOCROSS KD125-A3 77 125 KD125 MOTOCROSS KD125-A4 78 125 KD125 MOTOCROSS KD125-A5 79 125 KD125 MOTOCROSS KE125-A3 76 125 KE125 DUAL PURPOSE KE125-A4 77 125 KE125 DUAL PURPOSE KE125-A5 78 125 KE125 DUAL PURPOSE KE125-A6 79 125 KE125 DUAL PURPOSE KE125-A7 80 125 KE125 DUAL PURPOSE KE125-A8 81 125 KE125 DUAL PURPOSE KS125 74 120 KS125 DUAL PURPOSE KS125A 75 120 KS125 DUAL PURPOSE KX125A 75 125 KX125 MOTOCROSS KX125-A3 76 125 KX125 MOTOCROSS KX125-A4 78 125 KX125 MOTOCROSS KX125-A5 79 125 KX125 MOTOCROSS KX125-A6 80 125 KX125 MOTOCROSS KX125-A7 81 125 KX125 MOTOCROSS KE125-A9 82 125 KE125 DUAL PURPOSE KX125-B1 82 125 KX125 MOTOCROSS KX125-B2 83 125 KX125 MOTOCROSS KX125-C1 84 125 KX125 MOTOCROSS KX125 74 125 KX125 MOTOCROSS F7C 74 175 F7 175E ENDURO DUAL PURPOSE F7D 75 175 F7 175E ENDURO DUAL PURPOSE KDX175-A1 80 175 KDX175 OFF ROAD KDX175-A2 81 175 KDX175 OFF ROAD KD175-A1 76 175 KD175 MOTOCROSS KD175-A2 77 175 KD175 MOTOCROSS KD175-A3 78 175 KD175 MOTOCROSS KD175-A4 79 175 KD175 MOTOCROSS KE175-B1 76 175 KE175 DUAL PURPOSE KE175-B2 77 175 KE175 DUAL PURPOSE KE175-B3 78 175 KE175 DUAL PURPOSE KE175-D2 80 175 KE175 DUAL PURPOSE KE175-D3 81 175 KE175 DUAL PURPOSE KDX175-A3 82 175 KDX175 OFF ROAD KE175-D4 82 175 KE175 DUAL PURPOSE F7 71 175 175E ENDURO DUAL PURPOSE KDX200-A1 83 200 KDX200 OFF ROAD KDX200-A2 84 200 KDX200 OFF ROAD KDX200-A3 85 200 KDX200 OFF ROAD KH250-A5 76 250 KH250 STREET KT250-A2 76 250 KT250 TRIAL S1B 74 250 S1B STREET S1C 75 250 S1 STREET S2 72 350 S2 STREET KH400-A3 76 400 KH400 STREET KH400-A4 77 400 KH400 STREET KH400-A5 78 400 KH400 STREET S3 74 400 S3 STREET S3A 75 400 S3 STREET |
Author: | GUTS [ Tue Apr 11, 2017 1:12 pm ] |
Post subject: | Re: S2 clutch plates |
CMS and Partzilla still have them, so kind of like getting them from Mother Kaw. |
Author: | III [ Tue Apr 11, 2017 1:15 pm ] |
Post subject: | Re: S2 clutch plates |
GUTS wrote: CMS and Partzilla still have them, so kind of like getting them from Mother Kaw. Cheaper to buy right from Fartzilla than to buy from them at evilbay. I just checked. Most work fine if you use good oil, have hefty springs and a NEDs hydraulic pusher helps a lot too. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |