Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Clear float bowl
http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=12672
Page 1 of 1

Author:  GUTS [ Mon Apr 10, 2017 7:42 am ]
Post subject:  Clear float bowl

I've been looking for one of these for a while, just bought it. He has a few more.

http://www.ebay.com/itm/322422872398?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Author:  Hawaii-Mike [ Mon Apr 10, 2017 2:47 pm ]
Post subject:  Re: Clear float bowl

I bowl for $50 - pass. If it were three bowls for $50 I'd be interested.

Author:  GUTS [ Mon Apr 10, 2017 4:46 pm ]
Post subject:  Re: Clear float bowl

I gave $40. If it saves me time setting fuel and float levels it will be well worth it, that's why I wanted one.

Author:  4 Dog knight [ Mon Apr 10, 2017 5:44 pm ]
Post subject:  Re: Clear float bowl

I'm assuming that you would only use one for diagnostics/set up...as I reckon they would turn yellow with age with fuel in them long-term? They would look really cool, kind of like those watches with the clear backer so you can see the inner works going around! Would that be considered "distracted driving" IF you tried tuning while going down the road!!! :thumbup:

Author:  GUTS [ Mon Apr 10, 2017 6:31 pm ]
Post subject:  Re: Clear float bowl

It would be kind of cool to have three, install them and mount a Go-Pro to watch what the gas does as you go sport around.

Author:  Ja-Moo [ Mon Apr 10, 2017 6:41 pm ]
Post subject:  Re: Clear float bowl

Just look at a blender on high.

Author:  H2RTuner [ Mon Apr 10, 2017 7:07 pm ]
Post subject:  Re: Clear float bowl

I have a complete set of Lectron's that have those style bowls, blender isn't severe enough for some ways it works. And, after a few heat cycles, they warp, and...leak.

I made a testing bowl years ago, old blwl, single fuel fitting out the bottom, old drain fitting, clear plastic tube up the side, works beauty, less than a buck in costs.

Nothing wrong with using the clear bowl for setting carbs up, but, this one is severe in cost.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/