| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Transmission shimming ? http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=12605 |
Page 1 of 1 |
| Author: | Cisco [ Tue Mar 21, 2017 8:49 pm ] |
| Post subject: | Transmission shimming ? |
Would anyone have a link on this forum on how to shim out the gears ? I've tried searching with no avail Thanks |
|
| Author: | mraxl [ Tue Mar 21, 2017 10:05 pm ] |
| Post subject: | Re: Transmission shimming ? |
http://www.kawatriple.com/trans_manual/ ... anuals.htm |
|
| Author: | Cisco [ Thu Mar 30, 2017 10:31 am ] |
| Post subject: | Re: Transmission shimming ? |
I had a few questions , were does a guy buy shims to do this transmission shimming , also I've read some guys just send them out to have them undercut ? What's the contact number for the mark guy down in Florida ? Thanks |
|
| Author: | mraxl [ Thu Mar 30, 2017 11:20 am ] |
| Post subject: | Re: Transmission shimming ? |
Cisco wrote: I had a few questions , were does a guy buy shims to do this transmission shimming , also I've read some guys just send them out to have them undercut ? What's the contact number for the mark guy down in Florida ? Thanks shims: http://www.kawatriple.com/trans_manual/ ... lement.htm undercut: http://www.kawatriple.com/vendspl.html |
|
| Author: | BarryB [ Thu Mar 30, 2017 11:46 am ] |
| Post subject: | Re: Transmission shimming ? |
Just got mine back from FBG - there are others who do transmissions though - I picked Gast is all. Here's the thread on it http://kawi2strokes.com/forum/viewtopic.php?f=14&t=12628 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|