Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Mar 28, 2024 5:26 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: H1 Clutch cable
PostPosted: Tue Jan 10, 2017 4:10 pm 

Joined: Thu Mar 31, 2016 4:31 am
Posts: 164
Location: North of Copenhagen, Denmark, Europe
Hi - I've got one new Gray repro clutch Cable for my H1 rebuild, but as I want to mount flat bars, the cable will be too long :cry:

Any ideas ?

Can you buy a shorter Gray clutch cable anywhere ?

Thanks in anticipation

_________________
Peter says:
Keep the revs up !

Bikes:
H1 Candy Red, 1970
Moto Guzzi Daytona 1000, 1992


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Tue Jan 10, 2017 5:38 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
You would have to find a euro cable, which might be pretty hard. Usually you just have to get creative in the routing.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Tue Jan 10, 2017 5:45 pm 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3821
Location: Colorado Springs, CO. USA
There is a company I've used several times for this in San Carlos CA (edit -- add name Motion Pro) although in the USA they do incredible work. I told them I needed a Clutch Cable for my H2 4 inches shorter than stock. No problem and it was perfect in every sense. Well made, super high quality, been on my H2 with Super bike bars for years now.

(edit -- add name Motion Pro) https://www.motionpro.com/

:thumbup:

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Tue Jan 10, 2017 8:03 pm 
User avatar

Joined: Thu Jun 09, 2011 7:03 am
Posts: 4603
Location: Milang, South Australia
You can use a shorter S2 (350) cable, the O.D. of the cable sheath is smaller, but the wire is the same.....but they are black. The part no. for the original short (euro style) cable is 54011-032, but I haven't seen one for a long time. The part No. might give you something to work with!

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Wed Jan 11, 2017 9:54 am 

Joined: Thu Mar 31, 2016 4:31 am
Posts: 164
Location: North of Copenhagen, Denmark, Europe
BarryB wrote:
There is a company I've used several times for this in San Carlos CA (edit -- add name Motion Pro) although in the USA they do incredible work. I told them I needed a Clutch Cable for my H2 4 inches shorter than stock. No problem and it was perfect in every sense. Well made, super high quality, been on my H2 with Super bike bars for years now.

(edit -- add name Motion Pro) https://www.motionpro.com/

:thumbup:


Thanks Barry - much appreciated :)
I will try to contact the company. Might as well order at least 2 cables while I'm at it !

_________________
Peter says:
Keep the revs up !

Bikes:
H1 Candy Red, 1970
Moto Guzzi Daytona 1000, 1992


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Wed Jan 11, 2017 9:55 am 

Joined: Thu Mar 31, 2016 4:31 am
Posts: 164
Location: North of Copenhagen, Denmark, Europe
RODH2 wrote:
You can use a shorter S2 (350) cable, the O.D. of the cable sheath is smaller, but the wire is the same.....but they are black. The part no. for the original short (euro style) cable is 54011-032, but I haven't seen one for a long time. The part No. might give you something to work with!


Thanks Rod - using the cable from an S2 is tempting, but I'm a bit put off by the black color, though :?

_________________
Peter says:
Keep the revs up !

Bikes:
H1 Candy Red, 1970
Moto Guzzi Daytona 1000, 1992


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Fri Feb 24, 2017 10:39 pm 

Joined: Sun Jun 12, 2011 1:49 am
Posts: 348
Location: Pacifica, CA
Shorten the one you have... You can buy brass ends and the little metal sleeve that goes on the outer cover, do them myself when needed. Got tired of finding way of routing cables that were too long. Look here:

http://www.venhillusa.com/products/cabl ... parts.html

Thought they were in Europe as well... found it:

http://www.venhill.co.uk/

_________________
Don


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Sat Feb 25, 2017 4:09 am 
User avatar

Joined: Thu Jun 09, 2011 3:06 am
Posts: 4364
Location: PARIS FRANCE
900SL wrote:
RODH2 wrote:
You can use a shorter S2 (350) cable, the O.D. of the cable sheath is smaller, but the wire is the same.....but they are black. The part no. for the original short (euro style) cable is 54011-032, but I haven't seen one for a long time. The part No. might give you something to work with!


Thanks Rod - using the cable from an S2 is tempting, but I'm a bit put off by the black color, though :?

Painted it in grey 8-)


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Sat Feb 25, 2017 5:41 am 
User avatar

Joined: Thu Jun 09, 2011 7:03 am
Posts: 4603
Location: Milang, South Australia
Grey shrink-wrap, I wonder....?! :think:

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.


Top
 Profile  
 
 Post subject: Re: H1 Clutch cable
PostPosted: Sun Feb 26, 2017 8:10 am 

Joined: Thu Mar 31, 2016 4:31 am
Posts: 164
Location: North of Copenhagen, Denmark, Europe
don k wrote:
Shorten the one you have... You can buy brass ends and the little metal sleeve that goes on the outer cover, do them myself when needed. Got tired of finding way of routing cables that were too long. Look here:

http://www.venhillusa.com/products/cabl ... parts.html

Thought they were in Europe as well... found it:

http://www.venhill.co.uk/


Thanks a lot Don - had no knowledge of this company.
Looks very interresting :)

_________________
Peter says:
Keep the revs up !

Bikes:
H1 Candy Red, 1970
Moto Guzzi Daytona 1000, 1992


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group