Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Oct 31, 2024 7:34 pm

Board index » Our legendary Kawasaki Triples » Troubleshooting, How-to, and General Wrenching

All times are UTC - 5 hours




Post new topic Reply to topic  Page 2 of 2
  [ 13 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
rusty34
PostPosted: Thu Aug 16, 2012 11:51 am 
User avatar

Joined: Sat Jul 07, 2012 7:34 am
Posts: 382
Location: Concord, NC
Jim wrote:
I don't know what handlebars you're using, but bar-end mirrors work better than the stock type screw-in ones in many cases. Mine are the cheap ones off eBay, and have essentially no vibration caused blurring.


Stock bars as far as I know. I am leaning more toward keeping the appearance of the bike factory original as is practical but if the EX brake is that big an improvement I will stay with it and start looking for a MC. Think I do want the screw in hole though as I just bought two NOS mirrors and can only install one right now.

Rusty34

_________________
Tried firing every stroke and every other stroke, every stroke is better.

3 H2's, all stock
Seats by Tony O'Connor, they're gorgeous
H2B, converted to H2C
75 Paint & Decals by Brian H
75 Euro Seat by Tony O'Connor
Eldorado Motorcycle Seats, Australia
Top
 Profile  
 
rusty34
PostPosted: Thu Aug 16, 2012 11:56 am 
User avatar

Joined: Sat Jul 07, 2012 7:34 am
Posts: 382
Location: Concord, NC
Looney Cylinders wrote:
I had a look for you. Depending on what model year the EX250 master has the mirror mount:

http://www.ebay.com/sch/i.html?_odkw=ex ... r&_sacat=0

J


Thanks! :thumbup: The consensus is the stock MC with 9/16" bore will work but the EX 1/2" bore will give better feel. Do I have that right?

Rusty34

_________________
Tried firing every stroke and every other stroke, every stroke is better.

3 H2's, all stock
Seats by Tony O'Connor, they're gorgeous
H2B, converted to H2C
75 Paint & Decals by Brian H
75 Euro Seat by Tony O'Connor
Eldorado Motorcycle Seats, Australia
Top
 Profile  
 
Looney Cylinders
PostPosted: Thu Aug 16, 2012 12:18 pm 

Joined: Thu Jun 09, 2011 2:00 am
Posts: 1010
Location: Southern Ontario, Canada
Yup, you got it right.

1/2in bore master will give a more powerful brake for given lever effort. However, to have minimal lever travel everything must be optimized.

J
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 13 posts ]  Go to page Previous  1, 2

Board index » Our legendary Kawasaki Triples » Troubleshooting, How-to, and General Wrenching

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group