| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Low energy tach http://www.kawi2strokes.com/forum/viewtopic.php?f=14&t=14243 |
Page 2 of 2 |
| Author: | porschedave [ Sun Aug 30, 2020 6:59 pm ] |
| Post subject: | Re: Low energy tach |
Hey Monte did you move ? Also did you get the tach working properly? First thing I thought of was the plastic gear in the clutch cover They do crack |
|
| Author: | 64yblk [ Sun Aug 30, 2020 10:05 pm ] |
| Post subject: | Re: Low energy tach |
Yeah Dave, decided to relocate to an area I could sorta afford to retire in...CA sadly wasn't on the menu. I will be checking the cable, pin and gear tomorrow. I'll let y'all (see, I'm already soundin' local) know what I find. Thanks again guys for all the ideas. |
|
| Author: | 64yblk [ Tue Sep 01, 2020 2:49 pm ] |
| Post subject: | Re: Low energy tach |
Well, I checked the cable again, looks good, the plastic gear is not cracked and the pin is in place. So, unless there is a way to adjust the tach internally so the needle starts moving sooner and still rests at zero when off, I live with it. Thanks again for the help. |
|
| Author: | H2RTuner [ Tue Sep 01, 2020 3:33 pm ] |
| Post subject: | Re: Low energy tach |
I would think you also checked the tach/oil pump drive pinion on the end of the crank when you just had the clutch cover off, they can come lose if the wrong lock washer is used. If all else is good, it'd have to be in the tach inner workings. |
|
| Author: | 64yblk [ Tue Sep 01, 2020 6:01 pm ] |
| Post subject: | Re: Low energy tach |
Yep, good and tight. Sure seems to be the tach itself. Thanks for the help |
|
| Page 2 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|