Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Question about hardware
http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=7237		 Page 1 of 1
Author:  67lotus49 [ Wed Nov 13, 2013 11:35 pm ]
Post subject:  Question about hardware
So if you wanted to do a correct nut and bolt restoration is there a list of what type bolt goes where?
I'm taking apart a 73 H2A this week and it seems mostly untouched. Being my 3rd H2 restoration I
know a good percentage of what bolt is what but would be great to have a source for answers.
Author:  fastmike [ Thu Nov 14, 2013 1:15 am ]
Post subject:  Re: Question about hardware
I've wished to see the same diagram lotus. I have opted for stainless where I am at a loss, but those cool looking bolts with the numbers stamped in the recessed bolt head is what I would like to see. Placing them in the right application is the quest. I have Phillips heads on my front fender. Doesn't seem right, but without a guide, I'm at a loss as well.
Author:  Dewman418 [ Thu Nov 14, 2013 1:19 am ]
Post subject:  Re: Question about hardware
Been asking that for awhile for those of us that had there bike stripped to the from some nice person years ago. it would be great to add that to Dales great site. :thumbup:
Author:  mraxl [ Thu Nov 14, 2013 6:32 am ]
Post subject:  Re: Question about hardware
-find the part# from parts manual for part in question
-look at "Parts List - OEM" for part number
-click the link to display photo of part
(H2 Parts Manual includes a photo link)
Alternatively:
-download MSExcel file from "Parts Database"
-find the part# and click the photo link to display pic

Most standard bolts & nuts follow a part number code sequence that includes finish, head type, length, diameter.
-"Parts Codes"

I don't know how to make it any better or easier.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/