Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

Who carries JIS M8 X 1.25MM LEFT-HAND Nuts?
http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=7152		 Page 1 of 1
Author:  kawi3cyl [ Wed Oct 30, 2013 10:59 pm ]
Post subject:  Who carries JIS M8 X 1.25MM LEFT-HAND Nuts?
These are for the shift linkage for most if not all of the Triples. I currently can't find NOS (pn 318N0800), but judging by the prices for NOS RH nuts, they wouldn't be too reasonable if they were available. I've found JIS right-hand but not the one in the title. Anyone have a secret source? I'd like to pick up a handful of them for all my Triples.
Author:  Jim [ Wed Oct 30, 2013 11:06 pm ]
Post subject:  Re: Who carries JIS M8 X 1.25MM LEFT-HAND Nuts?
Darrin, McMaster-Carr has left handed M8x1.25 nuts in 18-8 stainless for a buck each:

http://www.mcmaster.com/#93510A125

There are probably other options there too.
Author:  kawi3cyl [ Wed Oct 30, 2013 11:56 pm ]
Post subject:  Re: Who carries JIS M8 X 1.25MM LEFT-HAND Nuts?
Jim wrote:
Darrin, McMaster-Carr has left handed M8x1.25 nuts in 18-8 stainless for a buck each:

http://www.mcmaster.com/#93510A125

There are probably other options there too.

Yes, I saw that Jim, but for the shifter, I would prefer it in JIS spec, the difference being JIS is 12mm flat-to-flat width, the other is 13mm. It's not a big difference in itself, but when cinched up to the fore and aft shifter connectors, the 13mm will stick out a bit. If I absolutely must, then I will, but I wanted to see if someone knows a source for the JIS bits. Thank you though. :wave:
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/