Kawi2strokes.com Forum

These are for the shift linkage for most if not all of the Triples. I currently can't find NOS (pn 318N0800), but judging by the prices for NOS RH nuts, they wouldn't be too reasonable if they were available. I've found JIS right-hand but not the one in the title. Anyone have a secret source? I'd like to pick up a handful of them for all my Triples.

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.

Darrin, McMaster-Carr has left handed M8x1.25 nuts in 18-8 stainless for a buck each:

http://www.mcmaster.com/#93510A125

There are probably other options there too.

_________________
If it surges, that's normal, upshift.

Yes, I saw that Jim, but for the shifter, I would prefer it in JIS spec, the difference being JIS is 12mm flat-to-flat width, the other is 13mm. It's not a big difference in itself, but when cinched up to the fore and aft shifter connectors, the 13mm will stick out a bit. If I absolutely must, then I will, but I wanted to see if someone knows a source for the JIS bits. Thank you though.

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.