making good progress
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| 1974 H1 Project http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=3468 |
Page 6 of 8 |
| Author: | two-stroke-brit [ Fri May 17, 2013 1:11 pm ] |
| Post subject: | Re: 1974 H1 Project |
making good progress
|
|
| Author: | tango911 [ Fri May 17, 2013 1:24 pm ] |
| Post subject: | Re: 1974 H1 Project |
kawi3cyl wrote: Nice looking motor! Was it relatively easy to clean the cases, or did it take awhile using the soda blasting compared to regular media? Thanks! Everything was taken apart. We bead blasted the cylinder head and cases. I say we because although im building this 90% of this bike, my good friend Keith Carlson did the tear down and rebuild of this engine, Im a fourstroke guy, he's the smoker guru. Along with Keith, we had Charlie Smith rebuild the crank and Dan Watson did the cylinder boring 2 over and we installed wiseco pistons. i still have some covers to polish out.  
|
|
| Author: | two-stroke-brit [ Fri May 17, 2013 3:18 pm ] |
| Post subject: | Re: 1974 H1 Project |
Are the check valves rebuildable on the 74s  if so get blow off preasure checked .
|
|
| Author: | tango911 [ Fri May 17, 2013 3:20 pm ] |
| Post subject: | Re: 1974 H1 Project |
two-stroke-brit wrote: Are the check valves rebuildable on the 74s if so get blow off preasure checked . i bought new ones. |
|
| Author: | two-stroke-brit [ Fri May 17, 2013 3:21 pm ] |
| Post subject: | Re: 1974 H1 Project |
even better
|
|
| Author: | triple cranks [ Sat May 18, 2013 6:08 pm ] |
| Post subject: | Re: 1974 H1 Project |
Wow! Looking great
|
|
| Author: | tango911 [ Sat May 18, 2013 9:16 pm ] |
| Post subject: | Re: 1974 H1 Project |
just updating as i go. finally got a roller!  
|
|
| Author: | tango911 [ Thu Dec 05, 2013 6:11 pm ] |
| Post subject: | Re: 1974 H1 Project |
fishished the engine enough to install into the frame.  
|
|
| Author: | tango911 [ Tue Dec 30, 2014 12:09 am ] |
| Post subject: | Re: 1974 H1 Project |
h1 progress is very slow. We built a new house and i built a new shop. Hope to finish in a few months. will have new seat cover soon, and not sure about the bars yet. going with the stock decals (black with yellow background) Hope it works.  new shop 
|
|
| Author: | triple cranks [ Tue Dec 30, 2014 1:11 am ] |
| Post subject: | Re: 1974 H1 Project |
Beautiful shop! What finish is that on the concrete? Everything looks great. |
|
| Page 6 of 8 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|