Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Fri May 10, 2024 11:45 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Mar 23, 2012 10:02 pm 

Joined: Sat Jan 28, 2012 6:23 pm
Posts: 96
Location: Springfield,Ma.
I admit I did a weak attempt of searching the forum so far.......but in the interest of time.......does anyone have any pics showing the cables and harnesses routed near the steering neck and the wiring in the battery area.....links to the thread would be fine......PO definately didn't put back to stock and I would like to make a descent attempt.......in the mean time i'll try some more searching....TIA guys.

_________________
Mike
________________________
1995 Yamaha Vmax VMX12G
1974 Kawasaki H2 750
1986 Kawasaki KDX200
________________________


Top
 Profile  
 
PostPosted: Sat Mar 24, 2012 8:45 am 
User avatar

Joined: Wed Jun 08, 2011 10:28 pm
Posts: 1559
Location: Tampa Bay Florida
This should help for under the tank...
http://kawtriple.com/mraxl/tips/cableroute/cablerouting.htm

_________________
We don't need no stinkin' Cams!


Top
 Profile  
 
PostPosted: Sun Mar 25, 2012 7:29 am 

Joined: Sat Jan 28, 2012 6:23 pm
Posts: 96
Location: Springfield,Ma.
Thanks Three. I've seen that page over the years and is definately helpful.

Nobody else has any pics they took during thier resto, eh?

_________________
Mike
________________________
1995 Yamaha Vmax VMX12G
1974 Kawasaki H2 750
1986 Kawasaki KDX200
________________________


Top
 Profile  
 
PostPosted: Sun Mar 25, 2012 9:35 am 

Joined: Sat Jan 28, 2012 6:23 pm
Posts: 96
Location: Springfield,Ma.
OK. I've got four cables:
Throttlr
Choke
Tach
Clutch

Maxrl's Cable Routing Pics:
750 (top pic)
I see three cables. It's obvious two are the throttle & choke. The third makes since to be the tach (cause it's down on that motor side). I would then think the fourth is the clutch and would be on the other side of the neck (it's on that side of the motor).

H2B/C (shot from front/LH side)
Only shows main harness. Maybe cable wasn't run just yet?

H2B (further down-shot from RH side)
Only shows two cables.

Am I correct in routing as noted in the first pic? Three cables on RH side and clutch on LH side? Makes sense that way.

Edit: Tach for Speedo

_________________
Mike
________________________
1995 Yamaha Vmax VMX12G
1974 Kawasaki H2 750
1986 Kawasaki KDX200
________________________


Last edited by grnh2750 on Sun Mar 25, 2012 10:10 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sun Mar 25, 2012 9:45 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2694
Location: Dandridge, TN, USA
Quote:
Am I correct in routing as noted in the first pic? Three cables on RH side and clutch on LH side? Makes sense that way.
Yes

_________________
Answers are here: http://kawatriple.com/


Top
 Profile  
 
PostPosted: Sat Mar 31, 2012 12:53 pm 

Joined: Sat Jan 28, 2012 6:23 pm
Posts: 96
Location: Springfield,Ma.
Bump......

No one has any pics of the wiring in the battery box area?

_________________
Mike
________________________
1995 Yamaha Vmax VMX12G
1974 Kawasaki H2 750
1986 Kawasaki KDX200
________________________


Top
 Profile  
 
PostPosted: Sun Apr 01, 2012 1:25 pm 
User avatar

Joined: Thu Jun 09, 2011 8:03 pm
Posts: 210
Location: Tweed. ont. Canada
I used old road test for proper location of wiring under the seat and other areas
Do you still need a photo?


Top
 Profile  
 
PostPosted: Wed Apr 04, 2012 7:16 am 

Joined: Sat Jan 28, 2012 6:23 pm
Posts: 96
Location: Springfield,Ma.
H2dude wrote:
I used old road test for proper location of wiring under the seat and other areas
Do you still need a photo?


Yeah. That would be great if you have one available. Unsure what your reffering to specifically as "Old Road Test". I presume out of a magazine or something?

_________________
Mike
________________________
1995 Yamaha Vmax VMX12G
1974 Kawasaki H2 750
1986 Kawasaki KDX200
________________________


Top
 Profile  
 
PostPosted: Wed Apr 04, 2012 11:45 am 
User avatar

Joined: Thu Jun 09, 2011 8:03 pm
Posts: 210
Location: Tweed. ont. Canada
I'll take some tomorrow and post of the battery and seat area.


Top
 Profile  
 
PostPosted: Sat Apr 07, 2012 1:53 pm 
User avatar

Joined: Thu Jun 09, 2011 8:03 pm
Posts: 210
Location: Tweed. ont. Canada
Sorry for the delay BUT here they are.

Image


Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group