rotortech wrote:
Picture?
Number 5 in this drawing:
Terry
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Screwed up ... http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=2023 |
Page 1 of 1 |
| Author: | Leemata [ Thu Jan 05, 2012 5:49 pm ] |
| Post subject: | Screwed up ... |
I seemed to have lost a part for my caliper between here & the platers. It's called Stopper,Pad A and it's number 5 in the drawing. Part number is 43046-001. This is for an S2A. Happen to have one? Terry |
|
| Author: | rotortech [ Thu Jan 05, 2012 6:42 pm ] |
| Post subject: | Re: Screwed up ... |
Picture? |
|
| Author: | Leemata [ Thu Jan 05, 2012 9:30 pm ] |
| Post subject: | Re: Screwed up ... |
rotortech wrote: Picture? Number 5 in this drawing: Terry |
|
| Author: | Gregz [ Sat Jan 07, 2012 8:22 am ] |
| Post subject: | Re: Screwed up ... |
Pm me address and I will get one in the mail to you. Free  . just don't lose it I don't have any more.Cheerz Gregz 
|
|
| Author: | 650hardtail [ Sat Jan 07, 2012 9:41 am ] |
| Post subject: | Re: Screwed up ... |
one is on its way today |
|
| Author: | Leemata [ Sat Jan 07, 2012 9:54 am ] |
| Post subject: | Re: Screwed up ... |
650hardtail wrote: one is on its way today Many thanks to you my friend. As I said earlier, I hope I get the chance to help someone in the future. Terry |
|
| Author: | 650hardtail [ Sat Jan 07, 2012 9:57 am ] |
| Post subject: | Re: Screwed up ... |
no problem...glad to help ya out |
|
| Author: | ChrisKawi [ Sat Feb 10, 2018 6:09 pm ] |
| Post subject: | Re: Screwed up ... |
This would be better if you could see the pictures. |
|
| Author: | Ja-Moo [ Sat Feb 10, 2018 6:15 pm ] |
| Post subject: | Re: Screwed up ... |
You are really pushing it chris. It is not the board. You need to stop complaining. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|