Kawi2strokes.com Forum

how do get the tacho gromet over the cable end ?.
or do you cut it then slip around the cable then slip it into the cover hole.?
thanks mark

_________________
she will never be pretty but she is a fun ride.

73 KAWASAKI H1 (Sold).
82 YAMAHA RD350LC
2000 KAWI KDX200H
2001 Triumph TT600

You could try putting the grommet in a bowl of piping hot water and softening it up.
I bought a repro one from Greg Claus and it was twice as stiff as an OEM one.
Havent tackled using it yet, but thats what I am going to try.
Perhaps a drop of vegetable oil in the hole would also help.

_________________
Bad decisions make the best stories.

The ones that Rick sells are slit.
Really can't see it when mounted.

_________________
There are only two types of motor sport racing:
Nitro and everything else
(Sometimes referred to as fast and slow)

Thats correct. What I have done was to cut it nicly and apply some glue afterwards but really not needed.

_________________
Iron On The Bayou.

thanks everyone

_________________
she will never be pretty but she is a fun ride.

73 KAWASAKI H1 (Sold).
82 YAMAHA RD350LC
2000 KAWI KDX200H
2001 Triumph TT600

No need to cut the grommet.
Lube with WD and start at the tach end and work down. It will go over the spring with no issues.