Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Mar 28, 2024 7:00 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 92 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next
Author Message
PostPosted: Thu Dec 01, 2011 12:19 am 
User avatar

Joined: Mon Jun 20, 2011 10:17 am
Posts: 384
Location: Oregon
Well guys I have been waiting a long time to start on this project, I was blessed to have picked up this gem from a great board member, :D a complete bike except pipes, I think he most likely kept the pipes, LOL :lol: Tore the motor down and not good as the wrist pin clip came loose and did a number on one barrel, welded it up and its all good. This will get the extra TLC as did my H1-A. :D

Image
Image
Image
Image
Image
Image
Image

_________________
As long as the wife buys those purses I keep collecting Triples.


Top
 Profile  
 
PostPosted: Fri Dec 02, 2011 8:47 pm 
User avatar

Joined: Mon Jun 20, 2011 10:17 am
Posts: 384
Location: Oregon
Frame is back and chrome is done, Put the rear fender on and started to make some progress.
Image
Image
Image
Image
Image
Image
Image

_________________
As long as the wife buys those purses I keep collecting Triples.


Last edited by mach3restore on Fri Dec 02, 2011 9:29 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri Dec 02, 2011 9:15 pm 

Joined: Thu Jun 09, 2011 9:13 am
Posts: 1001
Location: Auburn Ca
very nice way to go


Top
 Profile  
 
PostPosted: Sat Dec 03, 2011 4:24 am 
User avatar

Joined: Thu Jun 09, 2011 2:37 am
Posts: 203
Location: England ~ The Lake District
WOW, I love the '69 Mach111 ...stunning work so far :clap: ...keep posting the pics/progress :thumbup:

_________________
Comfortably Numb :o)


Top
 Profile  
 
PostPosted: Sat Dec 03, 2011 1:10 pm 
User avatar

Joined: Thu Jun 09, 2011 10:13 am
Posts: 345
Location: Dirty Old Town, Oslo, Norway.
im pretty sure you must be an billionaire with alot of spare time, im envious.

:mrgreen:


Top
 Profile  
 
PostPosted: Tue Dec 06, 2011 2:39 pm 

Joined: Thu Jun 09, 2011 2:00 am
Posts: 1010
Location: Southern Ontario, Canada
Are you saying you were able to weld up a gouged cast iron cylinder liner? :?

J


Top
 Profile  
 
PostPosted: Tue Dec 06, 2011 2:40 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
Looney Cylinders wrote:
Are you saying you were able to weld up a gouged cast iron cylinder liner? :?

J


Why not? As long as you rebore.

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
PostPosted: Tue Dec 06, 2011 6:07 pm 
User avatar

Joined: Thu Jun 09, 2011 12:55 am
Posts: 88
Location: ON
8-)


Top
 Profile  
 
PostPosted: Tue Dec 06, 2011 11:53 pm 
User avatar

Joined: Mon Jun 20, 2011 10:17 am
Posts: 384
Location: Oregon
Looney Cylinders wrote:
Are you saying you were able to weld up a gouged cast iron cylinder liner? :?

J

Yep, welded it up and rebored, came out great at .040 over and clean as a whistle, I will take some pics and post as soon as I get them back from the vapor blaster. I will never bead blast again. :thumbup: The dirt and grease comes off with no staining at all. :D

_________________
As long as the wife buys those purses I keep collecting Triples.


Top
 Profile  
 
PostPosted: Tue Dec 06, 2011 11:56 pm 
User avatar

Joined: Mon Jun 20, 2011 10:17 am
Posts: 384
Location: Oregon
Sverre wrote:
im pretty sure you must be an billionaire with alot of spare time, im envious.

:mrgreen:

Nope Sverre, Just lucky to have so many great triple helpers here, I wouldnt be this lucky if Kawbulman didnt help me out so much, great guy and big motivator. :D

_________________
As long as the wife buys those purses I keep collecting Triples.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 92 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group