Kawi2strokes.com Forum
http://www.kawi2strokes.com/forum/

H2R Tach
http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=14647
Page 1 of 1

Author:  Zambia [ Thu Mar 24, 2022 11:10 am ]
Post subject:  H2R Tach

I am in the middle of trying to restore an original H2R tach.. this one was once crashed, but seems to work mechanically fine. There are 2 difficult to fix items: 1 is the glass (obviously no fixing this, but local glass guys don't offer anything this thin). 2 is the trim ring which locks the glass down - this gauge is an odd size - smaller than S series, smaller than early H1 .. any ideas? We found a TZ gauge with the same ring, but that's a big sacrifice to tear up a TZ tach.

And one more question - wha do you think about the little red line at 4500 RPM? Weird, right? Should I put that on my reproduction face plate?

Author:  Zambia [ Thu Mar 24, 2022 11:12 am ]
Post subject:  Re: H2R Tach

Original damage

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/