| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Bent frame http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=14577 |
Page 1 of 1 |
| Author: | Never2Old [ Tue Oct 05, 2021 7:58 am ] |
| Post subject: | Bent frame |
How repairable are bents frame? What is too much? Dave |
|
| Author: | Jim [ Tue Oct 05, 2021 10:04 am ] |
| Post subject: | Re: Bent frame |
Most bent frames can be fixed to be straighter than new. I'm not sure if Dale has any companies that do that work in the vendor's section of the resource site. Have you checked there? |
|
| Author: | Never2Old [ Tue Oct 05, 2021 2:51 pm ] |
| Post subject: | Re: Bent frame |
I was talking to someone aabout buying a frame but didn't know how bad it was. Just found out it's probably worse than I hoped. Still looking for a frame or roller. Dave |
|
| Author: | nitrouscarl [ Tue Oct 05, 2021 3:33 pm ] |
| Post subject: | Re: Bent frame |
Had to make repairs on a couple of H2 frames. I would give it a good inspection check for cracks. Measure and laser make sure the motor fits! |
|
| Author: | ALTERED IMAGE [ Tue Oct 05, 2021 5:45 pm ] |
| Post subject: | Re: Bent frame |
Sorry, but what frame? c |
|
| Author: | Never2Old [ Wed Oct 06, 2021 7:59 pm ] |
| Post subject: | Re: Bent frame |
ALTERED IMAGE wrote: Sorry, but what frame? c 72-72 H2. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|