Thanks Guts!
A beautiful job and very good pics. This will help!
Can I ask how you got that satin finish on the front forks? Looks better then just polishing them
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| J's H1D Restoration http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=14533 |
Page 11 of 12 |
| Author: | Goodwrench [ Sun Feb 20, 2022 3:29 pm ] |
| Post subject: | Re: J's H1D Restoration |
Thanks Jim, How would I contact him? |
|
| Author: | Jim [ Sun Feb 20, 2022 3:39 pm ] |
| Post subject: | Re: J's H1D Restoration |
I'd think a PM might do it. His profile has an email link too. memberlist.php?mode=viewprofile&u=992 I just searched for the word "key" and found the old key thread. He posted this: Please put Keys in subject.. Johnnyo8300@yahoo.com |
|
| Author: | Goodwrench [ Sun Feb 20, 2022 5:38 pm ] |
| Post subject: | Re: J's H1D Restoration |
Thank you sir! |
|
| Author: | Goodwrench [ Sat Apr 02, 2022 8:49 am ] |
| Post subject: | Re: J's H1D Restoration |
Hi everyone and thanks to all who have posted to this thread. I really appreciate your guidance. I've started reassembly and I'm trying to get all of the wiring and harness's back to the original factory locations. I have pics of my bike prior to disassembly but the previous owner didn't care too much about keeping the bike in good order. Does anyone have pics of an H1D with the seat up, side coves off and open headlight bucket that I can use as a guide? |
|
| Author: | H1FR [ Sat Apr 02, 2022 11:43 am ] |
| Post subject: | Re: J's H1D Restoration |
Contact me. I have some H1D’s in the bone yard, I can send come picture of. Triplestuff.net |
|
| Author: | GUTS [ Sun Apr 03, 2022 11:58 am ] |
| Post subject: | Re: J's H1D Restoration |
Go to page 6 of this index and look at my H1D restoration. You should find all the pictures you need. |
|
| Author: | Goodwrench [ Sun Apr 03, 2022 12:41 pm ] |
| Post subject: | Re: J's H1D Restoration |
Thanks Guts! A beautiful job and very good pics. This will help! Can I ask how you got that satin finish on the front forks? Looks better then just polishing them
|
|
| Author: | GUTS [ Sun Apr 03, 2022 7:54 pm ] |
| Post subject: | Re: J's H1D Restoration |
I copy the satin finish the factory used, I do it with scotchbrite pads by hand. |
|
| Author: | Goodwrench [ Fri Apr 15, 2022 2:25 pm ] |
| Post subject: | Re: J's H1D Restoration |
Can anyone help me to identify this oil seal? It was included in the replacement kit that I received from FBG. I'm not sure where it goes but I'm getting ready to install the Crank and button up the crankcase and I sure don't want to miss anything. Thanks! |
|
| Author: | Jim [ Fri Apr 15, 2022 3:29 pm ] |
| Post subject: | Re: J's H1D Restoration |
Kick starter shaft seal maybe. |
|
| Page 11 of 12 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|