Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sat Apr 27, 2024 12:33 am

Board index » Our legendary Kawasaki Triples » Restoring your old gal, all shiny like when she was new

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 2
  [ 15 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
Yeddy911
 Post subject: H2 Handlebars
PostPosted: Sun May 16, 2021 10:40 am 
User avatar

Joined: Sun Feb 21, 2021 5:59 am
Posts: 154
Location: NY
I'm looking for advice on a decent set of handlebars for my '72 H2. I don't have originals to get any measurements from. Use is for general street riding, no low style bars.
Top
 Profile  
 
Zambia
 Post subject: Re: H2 Handlebars
PostPosted: Sun May 16, 2021 7:51 pm 
User avatar

Joined: Wed Jun 08, 2011 10:08 pm
Posts: 1901
Location: Campbellville Ontario
I like super bike bars - 2" rise and a bit of pull back - definitely not drag bars. The good thing is you can get them for about $25 so no great risk if you find them uncomfortable.
Top
 Profile  
 
kawi3cyl
 Post subject: Re: H2 Handlebars
PostPosted: Sun May 16, 2021 8:52 pm 
User avatar

Joined: Fri Jun 10, 2011 11:04 am
Posts: 3490
Location: Capitol of Ca, USA
https://www.z-power.co.uk/handle-bars-high-h1-500
Image

https://www.diablocycle.com/Kawasaki-H2 ... ebars.html
Image

https://z1parts.net/z1-900-kz900-handle-bar/
Image

_________________
"Only cheat the cheaters, boy - you can't cheat an honest man!" Mordecai Jones - The Flim Flam Man.
Top
 Profile  
 
Yeddy911
 Post subject: Re: H2 Handlebars
PostPosted: Thu May 20, 2021 7:34 am 
User avatar

Joined: Sun Feb 21, 2021 5:59 am
Posts: 154
Location: NY
Thanks for the post. Diablo Cycles are out of stock, and the Z Power are too much with shipping.
Are the Z1 KZ 900 bars close to original dimensions? Does anyone have the original bars diameter, width, rise, and pullback?
I have used clubman and superbike bars in the past when I raced my GT380 and GS1100, but I would like to have a set that looks closer to original.
Top
 Profile  
 
Yeddy911
 Post subject: Re: H2 Handlebars
PostPosted: Fri Jul 02, 2021 5:11 pm 
User avatar

Joined: Sun Feb 21, 2021 5:59 am
Posts: 154
Location: NY
Diablo had the replica's back in stock, and I am happy with the quality.
Thanks for the replies, and Happy 4th to all.
Top
 Profile  
 
Stev-o
 Post subject: Re: H2 Handlebars
PostPosted: Thu Jul 08, 2021 11:11 am 

Joined: Sat Oct 04, 2014 3:45 am
Posts: 796
Location: Cen Tex
Yeddy911 wrote:
Are the Z1 KZ 900 bars close to original dimensions? Does anyone have the original bars diameter, width, rise, and pullback?


I have 4" rise on my H2B and like them, not sure if they are original?

My original-style bars on the Z1 have 6" rise, too high for the H2 IMO.

https://z1parts.net/z1-900-kz900-handle-bar/

BTW - Kawasaki put two different bars on the H2

_________________
H2B..... H1E..... Z1B ..... RD350...... X6 Hustler..... TS250.... CB750 ..... CB550...... and a Bomber!!
Top
 Profile  
 
Yeddy911
 Post subject: Re: H2 Handlebars
PostPosted: Thu Jul 08, 2021 4:57 pm 
User avatar

Joined: Sun Feb 21, 2021 5:59 am
Posts: 154
Location: NY
It seems you are right, H2/A #46003-025, H2 B/C #46003-032. I wonder what the difference is.
Diablo lists their replicas for all H2 models.
Height: 18cm, Width: 77cm. No pullback dimension. So that's around 7" by 30 1/3".
Top
 Profile  
 
Stev-o
 Post subject: Re: H2 Handlebars
PostPosted: Thu Jul 08, 2021 5:57 pm 

Joined: Sat Oct 04, 2014 3:45 am
Posts: 796
Location: Cen Tex
Yeddy911 wrote:
It seems you are right, H2/A #46003-025, H2 B/C #46003-032. I wonder what the difference is.
Diablo lists their replicas for all H2 models.
Height: 18cm, Width: 77cm. No pullback dimension. So that's around 7" by 30 1/3".


I can't confirm that is correct, 7" rise seems too high.

May I suggest these, they are for a [GASP] CB750!

https://4into1.com/chrome-handlebars-53 ... 1969-1971/

Good thing about bars is they are relatively cheap and easy to change out.

Good luck

_________________
H2B..... H1E..... Z1B ..... RD350...... X6 Hustler..... TS250.... CB750 ..... CB550...... and a Bomber!!
Top
 Profile  
 
Yeddy911
 Post subject: Re: H2 Handlebars
PostPosted: Thu Jul 08, 2021 6:26 pm 
User avatar

Joined: Sun Feb 21, 2021 5:59 am
Posts: 154
Location: NY
I'll have to measure the Diablo handlebars to see if their description is accurate. They did not seem to be too high when I received them, but I don't have them at home to measure right now.
Top
 Profile  
 
ThreePipesSmokin
 Post subject: Re: H2 Handlebars
PostPosted: Sun Jul 11, 2021 8:43 am 
User avatar

Joined: Wed Jun 08, 2011 10:28 pm
Posts: 1558
Location: Tampa Bay Florida
The difference may be that the earlier ones are weighted...

_________________
We don't need no stinkin' Cams!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 15 posts ]  Go to page 1, 2  Next

Board index » Our legendary Kawasaki Triples » Restoring your old gal, all shiny like when she was new

All times are UTC - 5 hours


Who is online

Users browsing this forum: kc15842

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group