Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Factory Paint - The black parts H1E http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=14449 |
Page 1 of 1 |
Author: | TracksH1F [ Fri Apr 30, 2021 3:48 pm ] |
Post subject: | Factory Paint - The black parts H1E |
I'm about to paint my body parts. (the ones on the 1974 bike, not the 1963 me) From what I can tell in online photos, it appears that the back side of the side covers and the underside of the fuel tank were originally painted flat or semi gloss black. Is this correct? I was wondering about the rear fender. Was any of it black or was it all painted the colour of the tank? Thanks |
Author: | Doug VK [ Wed Sep 29, 2021 5:19 am ] |
Post subject: | Re: Factory Paint - The black parts H1E |
hello Doug in Canada. Did you get your questions answered about paint colors? |
Author: | Scully [ Wed Sep 29, 2021 6:50 am ] |
Post subject: | Re: Factory Paint - The black parts H1E |
That black was the base coat for the candy green or red.. |
Author: | TracksH1F [ Sat Oct 16, 2021 2:42 pm ] |
Post subject: | Re: Factory Paint - The black parts H1E |
Doug VK wrote: hello Doug in Canada. Did you get your questions answered about paint colors? Yes I did. I ended up painting it Toyota Ruby Flare Pearl. I put 2 coats of coloured clear on top of it to give it some depth and mimic the candy original. It was a really close match to the original Candy Red. After the decaling, I then put 3 more coats of clear on the all the parts. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |