| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Rear Tail Plastic Tray thing http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=14294 |
Page 1 of 3 |
| Author: | brendon11 [ Tue Nov 17, 2020 9:33 pm ] |
| Post subject: | Rear Tail Plastic Tray thing |
How does this plastic tray fit in there? It should fit up onto the shelf, right? aka, in its finished position, when I pick up the seat I'd see the bolts through black. or does it sit on the frame and the tail on top of it? is there a trick or technique? It feels as if I force it, the plastic will crack &/or shatter into lots of sadness....  
|
|
| Author: | RODH2 [ Tue Nov 17, 2020 10:33 pm ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
Tuck it in from underneath, you are half way there, as per your pic!! No need to force anything. So, the 'notches' along the plastic edge go into the pressed metal notches at the back, under the t/light. It goes under the ears for the frame mount bolts. |
|
| Author: | RODH2 [ Tue Nov 17, 2020 10:38 pm ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
You have it the 'wrong' way around in your pics. Think I've covered everything! 
|
|
| Author: | brendon11 [ Wed Nov 18, 2020 5:54 pm ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
Got it. I totally over thought that one. CHEERS! 
|
|
| Author: | RODH2 [ Wed Nov 18, 2020 6:35 pm ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
It took me about half an hour.......! 
|
|
| Author: | Jim [ Thu Nov 19, 2020 9:32 am ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
There! Try solving a problem like this on Facebook. It can't be done! |
|
| Author: | Evans Ward [ Thu Nov 19, 2020 10:34 am ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
Jim wrote: There! Try solving a problem like this on Facebook. It can't be done! Touché’ 
|
|
| Author: | Jim [ Thu Nov 19, 2020 10:49 am ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
Evans Ward wrote: Touché’ I'm waiting for someone who thinks I was serious to come along.  (going to go get a few minutes of practice in now) |
|
| Author: | RODH2 [ Thu Nov 19, 2020 7:16 pm ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
Facebook would come up with 50 different ways of doing it wrong..........
|
|
| Author: | scouse [ Sat Nov 21, 2020 11:52 pm ] |
| Post subject: | Re: Rear Tail Plastic Tray thing |
Interestingly I have a patten plastic tool tray that's too big for the tail piece It was sold to me by a well known triple expert Last time I posted a picture on here I used photobucket, but my account is locked as I have too many photo's for the free account  Will do some investigating? Gary T |
|
| Page 1 of 3 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|