Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
H2...rear alloy rim replica...impossible to assemble it(((( http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=13436 |
Page 1 of 2 |
Author: | dan67 [ Wed May 30, 2018 2:15 am ] |
Post subject: | H2...rear alloy rim replica...impossible to assemble it(((( |
hi/ciao i buyed 2 rims "Borrani" replica alloy for my H2B...the front fit….the rear not((( (for H1 rear there are sellers of similar wheels...for H2 not(((...i look the diameter rear drum...h1 7.1" h2 7.9"...) possible solutions: rear drum H1 and corret rims (but fit on h2?) or more simply someone has these rims on the rear wheel? thanks!!! GRAZIE!!! on pic h2 custon from the net whit this rims |
Author: | H-nube [ Thu May 31, 2018 2:12 pm ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
What diameter borrani rim are you using? I have an 18" borrani on an H2 and it used the stock length h2 spokes and fits perfect. |
Author: | H2RTuner [ Thu May 31, 2018 5:50 pm ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
Depends on the spoke nipple angle drilled into the rim. |
Author: | Ja-Moo [ Fri Jun 01, 2018 7:49 am ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
It seems you have the wrong rear rim. The hole angles are for the 500 and are drilled at a bit of a different angle. |
Author: | dan67 [ Fri Jun 01, 2018 11:00 am ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
Thanks All/grazie! I understood that the rays are long, I'm probably from H1 (small drum/hub) I ordered a new series thanks thanks |
Author: | JohnnyO [ Fri Jun 01, 2018 7:46 pm ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
Did that bike come from the states ? My friend had one just like that a few years ago for sale... |
Author: | dan67 [ Mon Jun 04, 2018 3:23 am ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
JohnnyO...Ist not this bike on pics...I'am Italian...I posted this pics for exsample Borrani rims thanks! dan |
Author: | dan67 [ Thu Jun 14, 2018 10:22 am ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
hi All HELP HELP HELP some willing to tell me what these spokes measures are...inch or better on cm))) Very THANKS-GRAZIE A TUTTI |
Author: | dan67 [ Tue Jul 03, 2018 3:28 am ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
Help Help Help |
Author: | Ja-Moo [ Tue Jul 03, 2018 12:12 pm ] |
Post subject: | Re: H2...rear alloy rim replica...impossible to assemble it( |
I'm getting around 140mm for both. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |