Direct me to a page and part number if you want. It could mean almost anything in that book.
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| 1970 H1 bolt sizes http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=13216 |
Page 1 of 1 |
| Author: | Steadfast [ Sun Dec 17, 2017 2:41 pm ] |
| Post subject: | 1970 H1 bolt sizes |
Hey all, I'm finally getting back into fixing my 1970 h1. I took it apart around 4 years ago and other projects, life, etc got in the way and it got put on a shelf. I thought I had put all the hardware for it together, but I only put a handful of bolts etc in a bin. I determined this earlier today while I was starting to reassemble everything. Does anyone have a list of what sizes the hardware around the bike is? If so it would be much appreciated. |
|
| Author: | Jim [ Sun Dec 17, 2017 4:33 pm ] |
| Post subject: | Re: 1970 H1 bolt sizes |
The parts manual, available on the resource site, lists a lot of them. I took only a quick look, but it seems like normal bolts were described OK, and that the specialized ones that you can't just get at a hardware supplier had only the part numbers. www.kawatriple.com |
|
| Author: | Steadfast [ Sun Dec 17, 2017 5:00 pm ] |
| Post subject: | Re: 1970 H1 bolt sizes |
Jim, thanks for the heads up on that. I guess I skipped over that when I was looking through the mraxl page. What does the parts list mean by "upset" bolts? |
|
| Author: | Jim [ Sun Dec 17, 2017 5:50 pm ] |
| Post subject: | Re: 1970 H1 bolt sizes |
Direct me to a page and part number if you want. It could mean almost anything in that book.
|
|
| Author: | III [ Sun Dec 17, 2017 6:18 pm ] |
| Post subject: | Re: 1970 H1 bolt sizes |
It refers to the way the bolts head is shaped. As opposed to being made from turned hex stock, the round stock is basically hammered out to shape it. From the web, so it HAS TO be right.... Heading or upset forging is a process by which stock, (typically cylindrical), is upset at its end in order to increase the cross section of the material in this area. This metal forging process may be hot, but is often a cold working operation. Cold working will take advantage of the strengthening of the material in the region worked. Unlike upsetting, as discussed under open die forging, upset forging can employ closed die. For typical industrial applications, heading, is mostly performed horizontally, as shown in the diagrams. Heading is a manufacturing process used extensively in the production of fasteners that include nails, screws, nuts and bolts. Due to the enormous quantity of fasteners produced in modern manufacturing industry, heading is the most commonly used metal forging process in the world today. The impression in the head may be forged in either the punch, the die, or both. |
|
| Author: | mraxl [ Mon Dec 18, 2017 9:40 am ] |
| Post subject: | Re: 1970 H1 bolt sizes |
You can download a MS Excel file at http://kawatriple.com/files/parts.xls There is a tab labeled HDWR that list all hardware descriptions and locations for all models and photos of most. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|