| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Rubber mounting chambers so they don't crack http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=13210 |
Page 1 of 1 |
| Author: | ChrisKawi [ Thu Dec 14, 2017 9:47 pm ] |
| Post subject: | Rubber mounting chambers so they don't crack |
Been looking around the forum and noticed quite a few posts of chambers that crack because of solid mounting. Mine are brand new stainless steel "Higgsomething" 1974 H1E. Cost a bit, so want them to last. My thought is to put poly or rubber bushings on the mounting points (foot rest flanges). Need the sizes, but are readily available from suspension bushing suppliers (even metric). Has anyone tried this? If so, does it work with stock 60 mm foot pegs. Can't load any part number÷%part number!" pictures. |
|
| Author: | Ja-Moo [ Thu Dec 14, 2017 10:13 pm ] |
| Post subject: | Re: Rubber mounting chambers so they don't crack |
https://www.youtube.com/watch?v=1GF19Xf7z04 |
|
| Author: | Mike [ Wed Jan 03, 2018 10:37 am ] |
| Post subject: | Re: Rubber mounting chambers so they don't crack |
Triple Darth has another Youtube video of how he did his, both interesting to watch. https://www.youtube.com/watch?v=mKj8hLAgSmw |
|
| Author: | husson73 [ Thu Jan 04, 2018 5:12 am ] |
| Post subject: | Re: Rubber mounting chambers so they don't crack |
my way is to use H2B/C rubber with cutting the rear triangular at the and welding a tube which is the size of H2B/C rubber. |
|
| Author: | mraxl [ Thu Jan 04, 2018 8:24 am ] |
| Post subject: | Re: Rubber mounting chambers so they don't crack |
http://kawatriple.com/chambermtg/chambermtg.htm |
|
| Author: | DGA [ Thu Jan 04, 2018 11:26 am ] |
| Post subject: | Re: Rubber mounting chambers so they don't crack |
My method, a sandwich mount, machine a bushing to go through the frame tube, screw it in that. These are very soft and compliant. |
|
| Author: | H2RTuner [ Thu Jan 04, 2018 11:45 am ] |
| Post subject: | Re: Rubber mounting chambers so they don't crack |
The earlier Yamaha TZ racers use a fairly low cost "Lord" type mount for their pipes, That is what I use. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|