Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Stev-o's 1974 H2 assembly - it's a rider! http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=12680 |
Page 2 of 9 |
Author: | Jim [ Wed Jun 28, 2017 4:47 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
It's nice to see Cody's stuff being so well taken care of. I hope you're going to flip the fork sliders and put a single EX caliper on. I just switched from a stock type dual disk setup to a single disk, EX caliper, 1/2" master cylinder, and EBC 129HH pads, and it's a big improvement. |
Author: | Stev-o [ Wed Jun 28, 2017 4:50 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
Jim wrote: It's nice to see Cody's stuff being so well taken care of. I hope you're going to flip the fork sliders and put a single EX caliper on. I just switched from a stock type dual disk setup to a single disk, EX caliper, 1/2" master cylinder, and EBC 129HH pads, and it's a big improvement. The plan is to get this bike together by Oct 1st and then consider upgrades! Any insight on the headlight bucket, Jim? |
Author: | Jim [ Wed Jun 28, 2017 5:09 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
I think it gets rubber grommets, but it's been way too long since I've had a stock one to remember for sure, sorry. |
Author: | Stev-o [ Wed Jun 28, 2017 5:10 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
Jim wrote: I think it gets rubber grommets, but it's been way too long since I've had a stock one to remember for sure, sorry. Ok, thanks |
Author: | Stev-o [ Thu Jun 29, 2017 6:24 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
Got some parts in the mail today and now it all makes sense... There is a rubber dampener that attaches to the bucket and then the collar goes on. I had 1 extra dampener but had to order another [$11.50] Then it goes together like this.... |
Author: | 900SL [ Fri Jun 30, 2017 3:53 am ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
Looking good, Stev-o Keep them posts coming |
Author: | Stev-o [ Sat Jul 08, 2017 2:44 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
First off, let me post a short rant: Eff you Pho-bukit! All of our pics that were hosted by them will now have to be replaced. I have now joined the Flickr ranks. Update: Small update due to work on my CB750 that had a blown up engine [rod through the case]. I now have all the parts for the H2 headlight bucket and it is mounted! I know that sounds so minimal but was not simple to get it right. ^ rubber dampeners, really Kawasaki?! Thanks to Danny. I've opted to go with the short turn signal stems, and Z1.net offers up a high quality part... https://flic.kr/p/Wu5z43 https://www.flickr.com/photos/156452678@N06/ https://flic.kr/p/VXkj2E https://www.flickr.com/photos/156452678@N06/ https://flic.kr/p/WhGFq7 https://www.flickr.com/photos/156452678@N06/ |
Author: | RODH2 [ Sat Jul 08, 2017 7:02 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
Ummmm...T20 Hustler!!! (short story...?) |
Author: | Stev-o [ Sat Jul 08, 2017 8:58 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
RODH2 wrote: Ummmm...T20 Hustler!!! (short story...?) Yes! Just bought it last month, it's a runner but it's on the lift to straighten out some bad wiring the PO did. I had one just like it when I was a kid, was my first "real" bike. Did you have one? |
Author: | RODH2 [ Sat Jul 08, 2017 11:05 pm ] |
Post subject: | Re: Stev-o's 1974 H2 assembly |
Stev-o wrote: RODH2 wrote: Ummmm...T20 Hustler!!! (short story...?) Yes! Just bought it last month, it's a runner but it's on the lift to straighten out some bad wiring the PO did. I had one just like it when I was a kid, was my first "real" bike. Did you have one? No! I was about to buy one in '68 when along came the Metal-flake Gold and Chrome T500 Suzuki....... "The rest is History!" Loved the T20, there was a bike which fought well above its weight!! |
Page 2 of 9 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |